hey @fbeek
thanks for your fast reply.
okay. i understand… the incoming signals works well but i dont get any signal since i’ve build the “cul-nano” to the thermostat.
i’ve currently create only one test-thermostat, adding the RF-adress and change the temperature in pimatic:
2016-12-15 22:44:36debug [pimatic-maxcul]: no packet to handle in send queue
22:44:36info [pimatic-maxcul]: Paket 0b01004000000012e5360020 send but no response!
22:44:33debug [pimatic-maxcul]: serial port buffer have been drained
22:44:33debug [pimatic-maxcul]: Send Packet to CUL: 0b01004000000012e5360020, awaiting drain event
22:44:33debug [pimatic-maxcul]: Retransmit packet 0b01004000000012e5360020, try 3 of 3
22:44:30debug [pimatic-maxcul]: serial port buffer have been drained
22:44:30debug [pimatic-maxcul]: Send Packet to CUL: 0b01004000000012e5360020, awaiting drain event
22:44:30debug [pimatic-maxcul]: Retransmit packet 0b01004000000012e5360020, try 2 of 3
22:44:27debug [pimatic-maxcul]: serial port buffer have been drained
22:44:27debug [pimatic-maxcul]: Send Packet to CUL: 0b01004000000012e5360020, awaiting drain event
22:44:27debug [pimatic-maxcul]: Retransmit packet 0b01004000000012e5360020, try 1 of 3
22:44:24debug [pimatic-maxcul]: serial port buffer have been drained
22:44:24debug [pimatic-maxcul]: Send Packet to CUL: 0b01004000000012e5360020, awaiting drain event
22:44:24debug [pimatic-maxcul]: Set desired temperature 16 for deviceId 12e536
22:43:52debug [pimatic-maxcul]: Thermostat 12e536 handlers removed
22:43:52debug [pimatic-maxcul]: Thermostat 12e536 destroyed
ooh sorry, homegear was installed on the pi… after uninstall and reboot they works fine…
debug [pimatic-maxcul]: got data from heatingelement 031ed2 with payload 18003100F7
23:04:02debug [pimatic-maxcul]: RSSI for Message : -100.5
23:04:02debug [pimatic-maxcul]: decoding Message Z0F6C0460031ED20000000018003100F7CB
23:04:02debug [pimatic-maxcul]: incoming raw data from CUL: Z0F6C0460031ED20000000018003100F7CB
23:04:00debug [pimatic-maxcul]: no packet to handle in send queue
23:04:00debug [pimatic-maxcul]: got OK-ACK Packet from 12e536
23:04:00debug [pimatic-maxcul]: RSSI for Message : -89
23:04:00debug [pimatic-maxcul]: decoding Message Z0E01020212E5360000000001180024E2
23:04:00debug [pimatic-maxcul]: incoming raw data from CUL: Z0E01020212E5360000000001180024E2
23:03:59debug [pimatic-maxcul]: serial port buffer have been drained
23:03:59debug [pimatic-maxcul]: Send Packet to CUL: 0b01004000000012e5360024, awaiting drain event
23:03:59debug [pimatic-maxcul]: Set desired temperature 18 for deviceId 12e536