PIO-Remote (Pioneer AVR-Remote)

---

Hi,
i´m using this plugin with my Pioneer N-30 Networkplayer.
How can i get rid of the anoying “Onscreen-Messages”?
If the Player is off i´m getting a “Received:R” every 30 Seconds.
If it is switched on i´m getting a bunch of Numbers and Information like:

Received: GBP07
GCP0610010""
GDP000010000100001
GEP01032"Krautrock World"
GEP02020"Terraplane - Lower"
GEP03000""
GEP04000""
GEP05000"“
GEP06029"128kbps"
GEP07000"”

How can i get rid of it?
I tried different Log-Levels, but that doesnt work.

Gruß M.

@Michael-Rudek
could you please open an issue on github so that @SaxnPaule , the dev, can take care.
thx!

EDIT MWittig:

• https://github.com/saxn-paule/pimatic-pio-remote/issues

You’ll need sign in with a github account.

Are these the information shown on the display of your player?
Which commands do you send to the player? Every command is acknowledged by the device and shown as toast message.

Yes this is displayed plus some other Stuff and a picture of the Radiostation.
I’m only using on and off, cause there is no Volume control and the display didn’t work for me.

To get rid of the “Toast-Messages” I’m using rules like:
sendAvr “connect” and after 2 seconds sendAvr “power.on” and after 5 seconds sendAvr “disconnect”

Gruß M.

Could you provide me a link to the datasheet where the supported commands are documented?

No, sorry. I don’t have anything like this.
I can only find something for AV-Receiver.
Gruß M.

In the current release (0.5.2) I removed the debug output of unhandled data. This should fix your issue.

@SaxnPaule Many thanks, i will test it
Gruß M.