Homeduino / Aldi/Hofer Sempre

---

Hallo,

hab mir heute die Wetterstation geholt. Über device descover wird nichts angezeigt.
Als Debug erhalte ich folgende Werte:
debug [pimatic-homeduino]: received: [ 240, 640, 62060 ] 11111101100110101001100101101001101010010101010101010110100110101010100110100101101012
18:36:30debug [pimatic-homeduino]: data: “RF receive 640 240 62060 0 0 0 0 0 00000010011001010110011010010110010101101010101010101001011001010101011001011010010102”

Hab ich da noch eine Möglichkeit das ganze hinzuzufügen?

Danke
lg Seelenbrokat

first: forum language is englisch, so please at least use google translator to make it readable for the non-german speaking users.
you can decode the protocoll, but thats quite a bit work to do. First you need to have several data blocks with the debug you gave and the corresponding temperatures/humidity/channel/…
This is need for as many as possible variations to see where the data is changing.
You can also have a look at the protocolls already included to see the usual structure. Usually the signal 11 can be translated to a logical 1, 10 is a logical 0 and 12 means footer (end of signal). In those logical 1s and 0s there might be an ID of the sensor and all the data transmitted, maybe a lowBattery indicator.

You display a debug line from your log. Is that the only line?
Normally it shows you also the lines for the several sensors it thinks it recognizes.

maybe the pulse count does not fit to one of the existing protocolls so there is no suggestion.

Hi,
Yes These are the only 2 Lines…
I think also that lines are missing.
What can i do?

As I said, there is no protocoll for your sensor. You need to record those debug prints and the corresponding temperature and humidity for several values. Best is to have some with same temp and different hum and vice versa.
Does the sensor has a channel switch or something similar?
Then you need to decode the debug as I said above (10=0, 11=1) and read the data bit-wise to see if your numbers are in there. They often group the bits in words (4 bit) and use most or least significant bit first (see wiki if you don’t know what that means).

thanks for replay. Yes i have a button to switch the channels.
Now i get tow lines more in debug mode:

debug [pimatic-homeduino]: received: [ 228, 484, 652, 2816, 62184 ] 22222202200220202002200202202020202002020220020202020223201002200220202002202024
20:42:45debug [pimatic-homeduino]: data: "RF receive 652 228 2816 484 62184 0 0 0 00000010011001010110011010010101010110101001101010101002013110011001010110010104"
20:42:45debug [pimatic-homeduino]: received: [ 228, 644, 62164 ] 11111101100110101001100101101010101001010110010101010110101001011001100110101001101012
20:42:45debug [pimatic-homeduino]: data: “RF receive 644 228 62164 0 0 0 0 0 00000010011001010110011010010101010110101001101010101001010110100110011001010110010102”

now i try to encrypt the codes…

Sorry Anduril,

it is not possible for me… i dot know how to encrypt this text. I checked the wiki.

it is essential to also have the temperature and humidity that was sent with this code.

debug [pimatic-homeduino]: received: [ 152, 240, 640, 62416 ] 22222212211221212112201212212121211212121212121212121221212112212112211212211221122113
19:23:44debug [pimatic-homeduino]: data: "RF receive 640 240 152 62416 0 0 0 0 00000010011001010110021010010101011010101010101010101001010110010110011010011001100113"
19:23:44debug [pimatic-homeduino]: received: [ 240, 640, 62412 ] 11111101100110101001100101101010100101010101010101010110101001101001100101100110011002
19:23:44debug [pimatic-homeduino]: data: "RF receive 640 240 62412 0 0 0 0 0 00000010011001010110011010010101011010101010101010101001010110010110011010011001100112"
19:23:44debug [pimatic-homeduino]: received: [ 240, 640, 62268 ] 11111101100110101001100101101010100101010101010101010110101001101001100101100110011002
19:23:44debug [pimatic-homeduino]: data: "RF receive 640 240 62268 0 0 0 0 0 00000010011001010110011010010101011010101010101010101001010110010110011010011001100112"
19:22:42debug [pimatic-homeduino]: received: [ 240, 640, 62048 ] 11111101100110101001100101101010100101010101010101010110101001101010010110101010010112
19:22:42debug [pimatic-homeduino]: data: "RF receive 640 240 62048 0 0 0 0 0 00000010011001010110011010010101011010101010101010101001010110010101101001010101101002"
19:22:42debug [pimatic-homeduino]: received: [ 240, 640, 62044 ] 11111101100110101001100101101010100101010101010101010110101001101010010110101010010112
19:22:42debug [pimatic-homeduino]: data: "RF receive 640 240 62044 0 0 0 0 0 00000010011001010110011010010101011010101010101010101001010110010101101001010101101002"
19:21:09debug [pimatic-homeduino]: received: [ 240, 640, 62420 ] 11111101100110101001100101101010100110010101010101010110101001101010010110010110010102
19:21:09debug [pimatic-homeduino]: data: "RF receive 640 240 62420 0 0 0 0 0 00000010011001010110011010010101011001101010101010101001010110010101101001101001101012"
19:21:09debug [pimatic-homeduino]: received: [ 240, 644, 62416 ] 11111101100110101001100101101010100110010101010101010110101001101010010110010110010102
19:21:09debug [pimatic-homeduino]: data: "RF receive 644 240 62416 0 0 0 0 0 00000010011001010110011010010101011001101010101010101001010110010101101001101001101012"
19:20:07debug [pimatic-homeduino]: received: [ 236, 644, 62416 ] 11111101100110101001100101101010101010010101010101010110101001101010010101100110011002
19:20:07debug [pimatic-homeduino]: data: "RF receive 644 236 62416 0 0 0 0 0 00000010011001010110011010010101010101101010101010101001010110010101101010011001100112"
19:20:07debug [pimatic-homeduino]: received: [ 236, 644, 62412 ] 11111101100110101001100101101010101010010101010101010110101001101010010101100110011002
19:20:07debug [pimatic-homeduino]: data: "RF receive 644 236 62412 0 0 0 0 0 00000010011001010110011010010101010101101010101010101001010110010101101010011001100112"
19:19:06debug [pimatic-homeduino]: received: [ 240, 640, 62044 ] 11111101100110101001100101101010101010010101010101010110101001011010011001011001011012
19:19:06debug [pimatic-homeduino]: data: "RF receive 640 240 62044 0 0 0 0 0 00000010011001010110011010010101010101101010101010101001010110100101100110100110100102"
19:19:05debug [pimatic-homeduino]: received: [ 240, 640, 62056 ] 11111101100110101001100101101010101010010101010101010110101001011010011001011001011012
19:19:05debug [pimatic-homeduino]: data: "RF receive 640 240 62056 0 0 0 0 0 00000010011001010110011010010101010101101010101010101001010110100101100110100110100102"
19:18:18debug [pimatic-homeduino]: data: “PING”

Again, you need to know the temperature that is transmitted with this signal. otherwise there is no chance to decode.

hi, i know. The Problem is that i don’t get it. …

Of course you don’t get it.
It is not configured yet.
Watch at the screen of your weather sensor when your entry is logged in pimatic. On your weather sensor your temp and humidity is displayed. That is needed.

sorry, didn’t said this clearly. As Harry said you need that data from your wheather station.

debug [pimatic-homeduino]: received: [ 240, 640, 62072 ] 11111101100110101001100110010101010101010101010101010110101001010101011010100101011012
12:57:27debug [pimatic-homeduino]: data: "RF receive 640 240 62072 0 0 0 0 0 00000010011001010110011001101010101010101010101010101001010110101010100101011010100102"
12:57:26debug [pimatic-homeduino]: received: [ 236, 640, 62068 ] 11111101100110101001100110010101010101010101010101010110101001010101011010100101011012
12:57:26debug [pimatic-homeduino]: data: “RF receive 640 236 62068 0 0 0 0 0 00000010011001010110011001101010101010101010101010101001010110101010100101011010100102”

22,4 Grad 64% Luftfeuchte