@Anduril Which Time is 122 O´Clock ?
And i think you need the Minutes now (haven´t test it)
Like:
"value": "7,00:00,18,11:00,4,17:00,22"
-
New Plugin - ChronoTherm (ex CronoAccesoSpento)
-
@Anduril
You wrote bad formatting schedules.
You should write so
variables:{ "name": "di1", "value": "123456,00:00,19,12:20,21,21:00,18" }, { "name": "di2", "value": "7,00:00,18,11:00,4,17:00,22" }, { "name": "di3", "value": 0 }
-
@Zacca I also tried your example variables before, but must have had a typo in them. Now it works, thanks a lot for your help.
-
Suggestion:
- add more debug messages and display critical error messages in a some variable. It will help to setup the device and schedule for beginners.
- in the simple mode display something like ON/OFF instead of 1 and 0 (misunderstanding).
In my case I’ve specified one day number twice and the plugin didn’t work.
-
Sorry @aggsoft you forgot to add step 3 …
- Find more time to improve your plugin
Anyway thanks for your suggestions
-
New 0.9.8-6 version
@aggsoft I’ve added some debugging messages -
This post is deleted!
-
I’m having issues using two chronotherm devices, one of thw two always give me the “you have entered a wrong variable/s”
This is my config:
{ "cas1Ref": "$plan-termostato-habitacion-lunes", "cas2Ref": "$sa1", "cas3Ref": "$sa1", "cas4Ref": "$sa1", "cas5Ref": "$sa1", "cas6Ref": "$sa1", "cas7Ref": "$sa1", "sum1Ref": "$sa1", "sum2Ref": "$sa1", "sum3Ref": "$sa1", "sum4Ref": "$sa1", "sum5Ref": "$sa1", "sum6Ref": "$sa1", "sum7Ref": "$sa1", "realtemperature": "$raspbee_00158d000232794d.temperature", "boost": true, "interval": 5, "offtemperature": 5, "ontemperature": 22, "xAttributeOptions": [], "id": "habitacion-chrono", "name": "Programador Calef Habitacion", "class": "ChronoThermDevice", "hap": { "service": "Lightbulb", "exclude": true }, "echo": { "additionalNames": [] } } { "cas1Ref": "$plan-termostato-salon-lunes", "cas2Ref": "$sa2", "cas3Ref": "$sa2", "cas4Ref": "$sa2", "cas5Ref": "$sa2", "cas6Ref": "$sa2", "cas7Ref": "$sa2", "sum1Ref": "$sa2", "sum2Ref": "$sa2", "sum3Ref": "$sa2", "sum4Ref": "$sa2", "sum5Ref": "$sa2", "sum6Ref": "$sa2", "sum7Ref": "$sa2", "realtemperature": "$raspbee_00158d0002321509.temperature", "interval": 60, "offtemperature": 14, "ontemperature": 21, "xAttributeOptions": [], "hap": { "service": "Lightbulb", "exclude": true }, "echo": { "additionalNames": [] }, "id": "programador-salon", "name": "Programador Salon", "class": "ChronoThermDevice" } { "name": "plan-termostato-habitacion-lunes", "value": "1234567,00:00,20,07:00,14,21:00,20" } { "name": "plan-termostato-salon-lunes", "value": "1234567,00:00,14,16:00,21,24:00,14" } { "name": "sa1", "value": 0 } { "name": "sa2", "value": 0 }
$raspbee_00158d000232794d.temperature: 18.69
$raspbee_00158d0002321509.temperature: 20.57 -
"value": "1234567,00:00,14,16:00,21,24:00,14"
I think there is no
24:00
Try23:30
By the way: it doesn´t make sense to switch to 14° at this time, you do it at 00:00 anyway…
-
Was a typo for 23
Changed it to be “value”: "1234567,00:00,14,16:00,21,23:00,14"
All good
Thanks