Adding support for Bresser 3CH weather sensor (Lidl)

---

Hello,

would it be possible to add this weather sensor: Bresser 3CH (offered by Lidl in Germany) to the rfcontroljs module
resp. pimatic-homeduino?

The protocol/data for decoding:
https://github.com/merbanan/rtl_433_tests/tree/master/tests/bresser_3ch
https://github.com/merbanan/rtl_433/blob/master/src/devices/bresser_3ch.clink text
or:
http://forum.iobroker.net/viewtopic.php?f=35&t=3831&p=35623#p35623link text

Greetings,
P.

@Harald654 Do you already have this device at hand? If yes, please create some debug data with pimatic-homeduino.

with some luck this is already supported

thanks for the answers,

I have three diveces at hand (so i can test all three channels of the divces togehter).
But somehow pimatic does not seems to receive any signals.
My config:

{
"settings": {
    "debug": true,
    "logLevel": "debug",
    "httpServer": {
      "enabled": true,
      "port": 80
    },
    "database": {
      "deviceAttributeLogging": [
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "*",
          "interval": "0",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "*",
          "type": "continuous",
          "interval": "5min",
          "expire": "7d"
        },
        {
          "deviceId": "*",
          "attributeName": "temperature",
          "type": "number",
          "expire": "1y"
        },
        {
          "deviceId": "*",
          "attributeName": "humidity",
          "type": "number",
          "expire": "1y"
        }
      ],
      "messageLogging": [
        {
          "level": "*",
          "tags": [],
          "expire": "7d"
        },
        {
          "level": "debug",
          "tags": [],
          "expire": "0"
        }
      ]
    },
    "authentication": {
      "secret": "xxxxxxxxxx"
    },
    "httpsServer": {},
    "cors": {},
    "gui": {}
  },
  "plugins": [
    {
      "plugin": "cron"
    },
    {
      "plugin": "mobile-frontend"
    },
    {
      "plugin": "homeduino",
      "driver": "gpio",
      "driverOptions": {},
      "receiverPin": 4,
      "transmitterPin": 0,
      "enableReceiving": true,
      "debug": true,
      "active": true
    },
    {
      "plugin": "dht-sensors"
    }
  ],
  "devices": [
    {
      "id": "my-sensor",
      "name": "dht22 example",
      "class": "DHTSensor",
      "type": 22,
      "pin": 7,
      "interval": 60000
    }
  ],
  "rules": [],
  "pages": [
    {
      "id": "favourite",
      "name": "Favourites",
      "devices": [
        {
          "deviceId": "my-sensor"
        }
      ]
    }
  ],
  "groups": [
    {
      "id": "test",
      "name": "test",
      "devices": [
        "my-sensor"
      ],
      "rules": [],
      "variables": []
    }
  ],
  "users": [
    {
      "username": "admin",
      "password": "xxxxxxxxxx",
      "role": "admin"
    }
  ],
  "roles": [
    {
      "name": "admin",
      "permissions": {
        "pages": "write",
        "rules": "write",
        "variables": "write",
        "messages": "write",
        "events": "write",
        "devices": "write",
        "groups": "write",
        "plugins": "write",
        "updates": "write",
        "database": "write",
        "config": "write",
        "controlDevices": true,
        "restart": true
      }
    }
  ],
  "variables": []
]

Even if I transmit signals with my radio remote control, pimatic displayed nothing in the GUI under “Log” - “Messages”.
Does someone recognize what I do wrong?

please check the howto number 4 part 2
https://forum.pimatic.org/topic/202/4-homeduino-433-mhz-sending-receiving-and-even-more/2

i guess there’s a problem with your pin numbers on the homeduino plugin.
first you should check to which gpio your receiver is attached to (should be GPIO17 as shown on the picture) then change the receiver pin to 1.

also pls. keep in mind that the raspi gpio is only capable of 3v3 !

I bought the same weather station and this should be the debug output I have.

07:51:10.194 [pimatic-homeduino] debug: data: "RF receive 504 4092 2060 8992 0 0 0 0 0102020201020201020202020202020202010201020101010101020101010201010201010203"
07:51:10.212 [pimatic-homeduino] debug: received: [ 504, 2060, 4092, 8992 ] 0201010102010102010101010101010101020102010202020202010202020102020102020103
07:51:10.231 [pimatic-homeduino] debug: weather12:  { id: 137,
07:51:10.231 [pimatic-homeduino] debug:>  channel: 1,
07:51:10.231 [pimatic-homeduino] debug:>  temperature: 8.7,
07:51:10.231 [pimatic-homeduino] debug:>  humidity: 110,
07:51:10.231 [pimatic-homeduino] debug:>  lowBattery: false }
07:51:10.246 [pimatic-homeduino] debug: weather14:  { id: 111,
07:51:10.246 [pimatic-homeduino] debug:>  channel: 1,
07:51:10.246 [pimatic-homeduino] debug:>  temperature: -140.6,
07:51:10.246 [pimatic-homeduino] debug:>  lowBattery: false,
07:51:10.246 [pimatic-homeduino] debug:>  humidity: 36 }
07:51:10.267 [pimatic-homeduino] debug: weather15:  { id: 2192,
07:51:10.267 [pimatic-homeduino] debug:>  channel: 1,
07:51:10.267 [pimatic-homeduino] debug:>  temperature: 140.5,
07:51:10.267 [pimatic-homeduino] debug:>  humidity: 219,
07:51:10.267 [pimatic-homeduino] debug:>  lowBattery: false }

i changed recive to pin 1, but I still do not receive any signals on the blog page.
Since the reciver works if i do not read it with pimatic, I think the problem is by my settings.

here my start-debug, is the invalid cors settings a problem?

pi@raspberrypi:~/pimatic-app $ sudo node_modules/pimatic/pimatic.js
18:05:08.111 2016-10-12 Wednesday
18:05:15.880 [pimatic] Starting pimatic version 0.9.34
18:05:16.252 [pimatic] Invalid config: Missing property “allowedOrigin” in /settings/cors
18:05:19.333 [pimatic, ppm] 2.15.6
18:05:19.411 [pimatic] Loading plugin: “pimatic-cron” (0.8.8)
18:05:20.218 [pimatic] Loading plugin: “pimatic-mobile-frontend” (0.9.11)
18:05:21.349 [pimatic] Loading plugin: “pimatic-dht-sensors” (0.9.1)
18:05:21.394 [pimatic] Loading plugin: “pimatic-homeduino” (0.9.11)
18:05:22.802 [pimatic-cron] the time is: Wed Oct 12 2016 18:05:22 GMT+0000 (UTC)
18:05:24.730 [pimatic] New device “dht22 example”…
18:05:24.859 [pimatic-homeduino] data: "ready"
18:05:24.877 [pimatic-homeduino] Connected to homeduino device.
18:05:24.927 [pimatic-homeduino] data: "ACK"
18:05:24.943 [pimatic-homeduino] Receiving on pin 1
18:05:25.232 [pimatic-mobile-frontend] packing static assets
18:05:25.845 [pimatic-mobile-frontend] packing static assets finished
18:05:25.861 [pimatic-mobile-frontend] rendering html
18:05:39.455 [pimatic-mobile-frontend] rendering html finished
18:05:39.554 [pimatic] Listening for HTTP-request on port 80…

@michibeck100
Can you send me your config and plugin settings?

cors should be of no problem. you can delete the cors entry in the config.json
have you checked the correct gpio on the pi?
also you need to check the voltage as stated above! the pi can only handle 3v3 on the gpio. if you power the receiver with 5v the data line may have 5v too!
the best way for 433mhz RF is the arduino solution with the flashed homeduino sketch.

Hello leader 21,

yes i have checked the correct gpio to the pi (i changed to the corresponding pins in your tutorial).

I recorded the raw data of the sensor , which I receive with the pi:

433gpio: 107 605 78 623 70 972 204 217 274 364 1158 610 801 683 756 717 571 155 589 76 360 400 729 67 510 185 396 329 324 446 532 167 273 466 551 189 555 162 274 467 335 405 565 142 586 157 284 450 350 403 570 172 301 412 499 209 586 182 559 148 283 443 304 446 274 465 298 491 506 195 508 195 293 430 343 398 525 197 366 432 531 124 561 228 239 484 277 433 585 188 468 219 306 414 545 176 342 911 764 767 714 663 775 704 765 700 515 205 555 193 325 441 503 290 419 227 186 553 250 479 548 198 261 448 565 167 521 223 344 378 268 458 519 234 503 267 280 414 251 471 512 258 225 468 494 286 471 215 545 209 244 475 273 462 253 477 321 528 386 229 523 209 276 448 335 399 512 238 266 471 497 230 523 278 183 529 193 484 587 130 514 253 253 461 523 181 252 985 778 726 736 729 721 714 762 728 495 200 524 223 269 438 556 178 542 216 240 465 274 486 468 276 225 544 437 268 441 282 232 529 203 529 447 228 506 260 262 456 224 513 483 274 221 526 455 246 466 284 420 286 243 527 230 483 229 524 175 521 473 264 455 261 247 489 278 488 482 211 260 485 612 153 462 285 175 523 225 525 478 233 474 258 252 514 473 233 259 961 729 822 623 782 708 770 698 705 493 278 458 239 246 490 490 254 491 225 241 490 240 489 515 268 213 495 478 251 488 237 258 496 210 505 480 274 454 221 303 455 264 490 488 198 253 577 413 294 430 305 416 285 201 511 225 530 237 463 252 486 488 261 478 235 301 453 223 544 428 252 260 496 470 278 443 277 223 503 230 497 489 316 392 253 239 552 421 290 215 1037 647 765 767 722 694 776 676 773 426 290 486 254 236 541 437 274 428 296 201 497 247 496 506 263 201 490 461 284 473 260 214 543 228 485 465 278 436 303 203 534 217 559 404 265 196 555 436 397 343 299 425 340 163 532 167 573 194 484 230 510 489 349 378 379 111 524 197 522 439 329 167 521 459 261 477 271 263 469 231 480 502 246 494 226 244 496 475 258 234 1015 712 731 691 788 687 813 665 763 441 313 450 281 195 535 441 262 446 327 205 498 239 495 476 264 193 548 443 261 466 288 183 524 222 588 416 259 464 225 295 446 270 536 439 262 188 544 468 251 449 273 431 351 151 598 173 545 155 596 130 652 363 335 409 233 232 522 209 498 484 334 114 594 431 259 439 359 159 510 212 507 475 236 502 281 187 515 448 268 226 1023 724 780 679 763 675 744 746 841 365 255 458 341 178 618 349 287 448 339 162 490 224 537 467 242 218 529 435 291 444 312 191 519 208 526 426 318 433 317 192 505 268 463 444 294 232 492 448 294 475 281 430 309 165 576 184 545 145 580 173 535 439 309 413 370 118 551 188 548 457 244 248 495 463 262 458 295 212 579 144 563 412 254 483 264 226 510 457 272 222 1076 649 765 682 755 735 726 719 765 486 272 419 482 528 463 323 387 334 173 539 187 545 434 300 190 545 441 340 401 284 184 530 215 586 370 339 423 291 155 521 250 568 378 308 210 551 409 304 428 263 472 271 214 562 190 547 183 517 187 531 471 340 36 354 309 182 515 206 550 435 309 207 554 123 84 188 264 447 330 160 657 71 580 436 234 496 374 103 541 455 336 158 993 692 869 565 816 653 763 742 758 429 380 378 338 164 526 419 288 439 335 147 546 200 586 382 408 108 575 366 306 427 373 144 528 184 622 366 292 404 349 169 547 219 513 449 265 220 505 449 315 433 339 389 336 153 564 188 519 215 530 184 537 445 293 412 306 213 558 189 501 433 293 225 508 483 302 394 282 193 565 196 529 448 271 448 306 184 532 422 350 195 1049 631 770 699 789 668 867 582 811 444 267 466 285 172 599 365 315 437 280 226 507 248 525 415 326 168 557 439 276 437 337 167 537 195 614 355 309 428 313 160 546 208 572 394 278 206 525 425 348 417 294 424 291 228 550 174 527 169 529 236 550 430 383 335 317 156 588 146 515 463 292 185 526 470 315 435 256 210 536 212 565 390 289 452 296 205 509 480 281 170 1517 731 752 661 792 594 131 772 661 858 365 444 269 293 251 499 442 250 477 327 150 637 87 579 411 268 244 553 403 278 478 263 227 496 205 580 429 249 477 266 215 522 186 523 476 256 242 637 292 306 456 326 399 292 206 566 178 730 36 514 143 691 318 353 351 353 154 564 166 619 344 348 194 594 346 322 409 284 212 561 181 517 428 334 424 281 194 547 472 232 210 1019 708 759 694 784 658 807 668 846 396 330 400 343 140 539 447 286 441 302 161 540 208 528 466 315 177 530 436 257 480 267 216 569 161 524 437 304 447 285 204 549 158 580 421 295 181 530 446 416 322 308 418 1049 190 557 147 593 177 558 411 423 289 344 164 529 239 495 426 338 163 540 431 280 441 326 171 519 223 545 435 269 474 271 212 531 448 283 201 1052 658 801 660 746 716 778 708 788 398 334 408 295 202 535 431 316 441 364 115 599 121 529 439 276 221 503 481 295 439 301 190 551 179 513 455 318 396 355 142 533 236 554 384 334 173 584 395 292 437 320 423 291 214 483 245 490 244 606 121 506 487 248 424 323 203 595 108 539 433 354 143 620 354 294 462 368 110 567 165 553 426 290 437 296 192 516 467 329 174 1067 639 742 739 718 736 748 695 804 407 410 346 295 171 529 490 239 479 256 226 545 160 562 413 334 151 572 437 270 427 388 160 509 194 543 428 279 445 297 204 579 147 533 427 380 117 569 392 320 454 253 458 285 198 533 188 604 162 511 236 516 431 328 416 293 179 542 203 540 421 284 174 553 442 302 449 269 213 577 192 505 441 289 476 324 195 509 392 273 215 999 756 776 658 885 585 838 621 759 457 320 421 280 208 585 381 284 459 246 251 556 179 497 459 271 237 490 456 295 441 321 170 549 196 549 432 296 435 302 180 575 170 600 344 325 207 514 442 325 409 349 352 359 151 545 181 547 210 556 171 546 413 358 376 339 168 525 237 500 458 307 183 483 469 288 460 276 200 589 157 566 401 277 436 318 189 560 393 376 154 157978 -#: 1359

So i tihnk my recviver works correctly.
What would I get for a debug entry if pimatic does not recognize the sensor or can not start with the received data?
Would I get an entry at all?

Greetings,
H.

I also have one of these sensors. I was able to add it to the RFLink package without much trouble and it works fine there. I also cannot get it to show up on my arduino with homeduino. I think the problem is the initial pulse.
In thise protocol there is a series of 8 pulse (10101010) with a duration of 750-100us. I think the RFcontrol library cannot pick this protocol up as written.