[solved]HomeduinoRfSwitch, how to send the same signal for on and off

fbeek

Hello,

i have a little problem with my REV RF Sockets.

These sockets have 2 Buttons on the Remote (On/Off and Dim).
The remote sends always the same signal to toggle the socket.

I have configured a switch2 device to control the socket, it is working but only on every second try (Homeduino is sending different signals for on and off).

Is there any possibilty to tell the homeduino plugin that it should send the same signal for on and off?

Regards

Raducanu

I don’t know if there is an HomeduinoRfButton device.

What you can try is to create a rule which turns the switch off directly after turn it on.

“When Switch0 is turned on for 2 seconds then turn off Switch0”

leader21

having a homeduinorfbuttonsdevice
https://github.com/pimatic/pimatic-homeduino/blob/master/device-config-schema.coffee#L124-L165

{
  "id": "outletswitch",
  "name": "Outlet Switch",
  "class": "HomeduinoRFButtonsDevice",
  "buttons": [
    {
      "id": "power",
      "text": "on off",
      "protocols": [{
        "name": "switch2",
        "options": {
          "houseCode": 22,
          "unitCode": 22,
          "state": true
        }
      }]
    },

hopefully this helps.

fbeek

Ah, thank you.

This works for me.