@mwittig
the data we use are the command what the remote send if the press “P2” button two times.
i have try all possible solutions:
Power on the shutter device, press “Program” two Times, then dit i press “up”.
nothing happens. The same if i press the button one time…
I do the same with pressing the button on the shutter device, nothing happens.
{
"buttons": [
{
"id": "program",
"text": "program",
"protocols": [
{
"name": "shutter3",
"options": {
"command": "program",
"id": 302736933,
"channel": 1
},
"rfrepeats": 7
}
]
}
],
"id": "program",
"name": "program",
"class": "HomeduinoRFButtonsDevice"
}
this is my button to start the program process. I have play around with the rfrepeats…
This is my UP/Down Device (rfshutter):
{
"protocols": [
{
"name": "shutter3",
"options": {
"id": 302736933,
"command": "up",
"channel": 1
},
"rfrepeats": 1
},
{
"name": "shutter3",
"options": {
"id": 302736933,
"channel": 1,
"command": "down"
},
"rfrepeats": 1
},
{
"name": "shutter3",
"options": {
"id": 302736933,
"channel": 1,
"command": "stop"
},
"rfrepeats": 1
}
],
"id": "jalousie",
"name": "Jalousie",
"class": "HomeduinoRFShutter"
}
i have try any of repeats.
i have try also the device with buttons:
{
"id": "rolladen",
"name": "Jalousie2",
"class": "HomeduinoRFButtonsDevice",
"buttons": [
{
"id": "roll1",
"text": "Hoch",
"protocols": [
{
"name": "shutter3",
"options": {
"command": "up",
"channel": 1,
"id": 302736933
},
"send": true,
"rfrepeats": 1
}
]
},
{
"id": "roll2",
"text": "Stop",
"protocols": [
{
"name": "shutter3",
"options": {
"id": 302736933,
"channel": 1,
"command": "stop"
},
"send": true
}
]
},
{
"id": "roll3",
"text": "Runter",
"protocols": [
{
"name": "shutter3",
"options": {
"id": 302736933,
"channel": 1,
"command": "down"
},
"send": true
}
]
}
]
}
Now i am at the poit, that i dont know what to do… is anyone with a remote in Germany Berlin? So that i can borrow me a remote?
Thank you for your Time!!