smartmeter2 issue

stingone

Hi everyone. today got my cable for p1 meter working. it shows al the data on raspberry. however im not able to get the data in pimatic. when i read the log it says

./p1meterdata.js: line 1: syntax error near unexpected token (' ./p1meterdata.js: line 1:var serialport = require(“serialport”);’

{
      "id": "smartmeter",
      "class": "Smartmeterdevice",
      "name": "Smartmeter",
      "serialport": "/dev/p1",
      "baudRate": 115200,
      "dataBits": 8,
      "parity": "none",
      "stopBits": 1,
      "flowControl": true
    },

I use the smartmeter2 plugin.

ruudvnl

@stingone Your plugin has a mistake

I use this plug in and all is working fine

{
  "id": "smartmeter",
  "class": "Smartmeterdevice",
  "name": "Smartmeter",
  "serialport": "/dev/ttyUSB0",
  "baudRate" : 9600,
  "dataBits" : 7,
  "parity" : "even",
  "stopBits" : 1,
  "flowControl" : true
}

leader21

@stingone
check where your pi smartmeter is attached to and edit the serialport accordingly at your device (see example above).

try to get the correct usb port with dmesg | grep usb for example