Homeduino and the debug modus

V1per

Hello,

in the V0.9 the debug modus from pimatic has changed. I read that I have to write in the config.json "debug": "true" in the homeduino device.
But there cames an error messaged so I wrote "debug": true but the same error message.
But after Pimatic is started the debug modus from homeduino works but when Pimatic runs a few time there is no debug modus for homeduino.
How I can enable the debug modus forever?

Andre

V1per

Have nobody an idea?

V1per

Ok I found it out. The homeduino can’t choose in the debug mode. So you have to choose debug and all and the homeduino messages were shown.

leader21

sorry, actually there’s holiday season and maybe there’s some lag for answering questions.
but glad to hear you solved it.

usually, when activating debug = yes in the homeduino plugin settings the debug data should be displayed, regardless the settings of pimatic itself. this should be valid for all plugins.
at least this is what i understood from the last changes made to this issue.
here’s the commit :
https://github.com/pimatic/pimatic/commit/355ef517c31c1c8635c9ec6793e04401a5ef349c