AWST-6000 - presence not shown in GUI?!

---

Hey guys,

I am trying to get my newly purchased AWST-6000 to work but I have problems getting the presence in the GUI.

Movements in front of the PIR triggers the pimatic-homeduino debug output.
The id and unit code are always the same, the presence changes from “false” to “true” and vice versa.
With that information, I have created a new device:
Class: HomeduinoRFPir
Protocol: pir5
id and unit are set

The device is there, but the presence value (always false) in the GUI does not change.
Is there anything I am missing?

pimatic latest
pimatic-homeduino latest

Thanks,
Domink

can you pls. post your device and debug code?

I had to start “pimatic.js” because the debug info did not show up in the GUI.

This happens when I flick the “LEARN” switch on the back of the device to SET:

20:57:46.428 [pimatic-homeduino] data: "RF receive 280 2532 1232 9848 0 0 0 0 010002020000020002020002000200020002000200020002000002020000020200020002000200000200020002020002000200000200020200020000020002020003"
20:57:46.433 [pimatic-homeduino] received: [ 280, 1232, 2532, 9848 ] 020001010000010001010001000100010001000100010001000001010000010100010001000100000100010001010001000100000100010100010000010001010003
20:57:46.438 [pimatic-homeduino] switch1:  { id: 20961166, all: false, state: true, unit: 9 }
20:57:46.445 [pimatic-homeduino] pir5:  { id: 20961166, all: false, presence: true, unit: 9 }
20:57:46.449 [pimatic-homeduino] contact1:  { id: 20961166, all: false, contact: false, unit: 9 }
20:57:46.746 [pimatic-homeduino] data: "RF receive 280 2532 1240 9860 0 0 0 0 010002020000020002020002000200020002000200020002000002020000020200020002000200000200020002020002000200000200020200020000020002020003"
20:57:46.753 [pimatic-homeduino] received: [ 280, 1240, 2532, 9860 ] 020001010000010001010001000100010001000100010001000001010000010100010001000100000100010001010001000100000100010100010000010001010003
20:57:46.759 [pimatic-homeduino] switch1:  { id: 20961166, all: false, state: true, unit: 9 }
20:57:46.763 [pimatic-homeduino] pir5:  { id: 20961166, all: false, presence: true, unit: 9 }
20:57:46.767 [pimatic-homeduino] contact1:  { id: 20961166, all: false, contact: false, unit: 9 }
20:57:47.064 [pimatic-homeduino] data: "RF receive 276 2536 1244 9856 0 0 0 0 010002020000020002020002000200020002000200020002000002020000020200020002000200000200020002020002000200000200020200020000020002020003"
20:57:47.069 [pimatic-homeduino] received: [ 276, 1244, 2536, 9856 ] 020001010000010001010001000100010001000100010001000001010000010100010001000100000100010001010001000100000100010100010000010001010003
20:57:47.072 [pimatic-homeduino] switch1:  { id: 20961166, all: false, state: true, unit: 9 }
20:57:47.079 [pimatic-homeduino] pir5:  { id: 20961166, all: false, presence: true, unit: 9 }
20:57:47.083 [pimatic-homeduino] contact1:  { id: 20961166, all: false, contact: false, unit: 9 }
20:57:47.383 [pimatic-homeduino] data: "RF receive 276 2536 1244 9864 0 0 0 0 010002020000020002020002000200020002000200020002000002020000020200020002000200000200020002020002000200000200020200020000020002020003"
20:57:47.389 [pimatic-homeduino] received: [ 276, 1244, 2536, 9864 ] 020001010000010001010001000100010001000100010001000001010000010100010001000100000100010001010001000100000100010100010000010001010003
20:57:47.397 [pimatic-homeduino] switch1:  { id: 20961166, all: false, state: true, unit: 9 }
20:57:47.402 [pimatic-homeduino] pir5:  { id: 20961166, all: false, presence: true, unit: 9 }
20:57:47.406 [pimatic-homeduino] contact1:  { id: 20961166, all: false, contact: false, unit: 9 }
20:57:47.701 [pimatic-homeduino] data: "RF receive 276 2532 1244 9864 0 0 0 0 010002020000020002020002000200020002000200020002000002020000020200020002000200000200020002020002000200000200020200020000020002020003"
20:57:47.710 [pimatic-homeduino] received: [ 276, 1244, 2532, 9864 ] 020001010000010001010001000100010001000100010001000001010000010100010001000100000100010001010001000100000100010100010000010001010003
20:57:47.717 [pimatic-homeduino] switch1:  { id: 20961166, all: false, state: true, unit: 9 }
20:57:47.721 [pimatic-homeduino] pir5:  { id: 20961166, all: false, presence: true, unit: 9 }
20:57:47.726 [pimatic-homeduino] contact1:  { id: 20961166, all: false, contact: false, unit: 9 }

The ID and the unit will stay the same all the time.
I have created three new devices: switch1, pir5 and contact1 and none of them react to the presence state change.

The device config:

{
      "protocols": [
        {
          "name": "pir5",
          "options": {
            "id": "20961166",
            "unit": 9
          }
        }
      ],
      "id": "test",
      "name": "test",
      "class": "HomeduinoRFPir"
    },
    {
      "protocols": [
        {
          "name": "contact1",
          "options": {
            "id": "20961166",
            "contact": false,
            "unit": 9
          }
        }
      ],
      "id": "test-2",
      "name": "test-2",
      "class": "HomeduinoRFContactSensor"
    },
    {
      "protocols": [
        {
          "name": "switch1",
          "options": {
            "id": "20961166",
            "unit": 9
          },
          "send": true,
          "receive": true
        }
      ],
      "id": "test-3",
      "name": "test-3",
      "class": "HomeduinoRFSwitch"
    }

try to remove the " at the id, this field should be number not string
"id": 20961166,

how did you create the switch - manually or with the gui device editor?

I was using both the device editor and the device discovery.
The device editor treats the id as a string, the device discovery leaves it a number.

Removing the quotes did the trick.
I guess we have found a bug there?

Yes it was a bug. This should be fixed now.