Mumbi m-FS300 / Flamingo FA500S (without dip switches)

---

Hi,
I bought a Mumbi m-FS300 aka Flamingo FA500S. They are working using a script using pilight sending the rawcode (see forum.pilight.org/Thread-Flamingo for some dicussion and the script):

#!/bin/bash
outlet=$1
onoff=$2
rawcode=""

declare -A outlets
outlets['AON']="330 4940 330 1000 320 1010 970 360 320 1010 310 1010 970 370 320 1010 970 360 320 1010 970 370 960 370 960 360 320 1010 970 380 310 1020 300 1020 960 370 960 380 310 1020 960 370 310 1010 970 380 300 1030 950 380 300 1020
 960 380 950 370 310 1020"
outlets['AOFF']="320 4950 330 1000 320 1010 970 360 320 1010 320 1000 980 370 310 1010 320 1020 310 1010 970 370 320 1010 970 360 970 360 310 1030 960 370 960 360 970 360 320 1020 320 1010 970 360 310 1020 310 1040 300 1020 310 1020 310
1010 970 370 960 370 310 1020"
outlets['BON']="330 4950 320 1010 320 1000 980 350 330 1010 310 1010 980 360 320 1010 320 1010 320 1010 970 370 970 360 320 1010 970 360 970 370 970 360 310 1030 950 370 960 380 310 1020 960 370 310 1020 960 370 320 1020 310 1010 310 102
0 960 380 310 1010 960 370"
outlets['BOFF']="320 4950 320 1010 320 1000 980 350 330 1000 320 1020 960 370 320 1020 310 1010 970 360 970 370 970 360 970 360 960 370 310 1030 310 1020 310 1020 960 360 970 370 310 1030 300 1020 310 1020 310 1030 310 1020 960 370 960 3
70 960 370 310 1010 970 370"
outlets['CON']="320 4950 980 350 970 360 970 360 320 1010 320 1010 970 370 960 370 310 1020 310 1020 310 1030 960 360 970 360 970 370 300 1030 960 370 310 1020 960 370 960 390 950 370 310 1020 960 370 300 1040 300 1030 950 380 300 1030 3
00 1030 300 1020 960 370"
outlets['COFF']="320 4950 970 360 970 360 970 360 310 1020 310 1010 970 370 970 360 970 360 970 360 320 1030 960 360 970 370 950 370 310 1040 950 370 960 370 310 1020 310 1030 960 370 960 370 300 1030 300 1030 960 370 960 370 310 1030 95
0 380 300 1020 960 370"

if [ -n "${outlets["$outlet$onoff"]}" ]
then
rawcode=${outlets["$outlet$onoff"]}
echo "Found rawcode, executing set outlet '$outlet' to state '$onoff'"
pilight-send -p raw -c "$rawcode"
else
echo "I don't know what you mean by set '$outlet' to '$onoff'"
echo "Either the array does not contain a code for '$outlet$onoff' or it is empty"
fi
exit 0

As I want to switch completly to pimatic, I need some help here. When pressing the “A On” button on the remote control Pimatic shows the following:

debug [pimatic-homeduino]: led1: { id: 1433565, unit: 2, state: true }
19:51:00debug [pimatic-homeduino]: contact2: { id: 716782, contact: false }
19:51:00debug [pimatic-homeduino]: pir1: { unit: 5, id: 26, presence: true }
19:51:00debug [pimatic-homeduino]: switch7: { unit: 2, id: 7, state: false }
19:51:00debug [pimatic-homeduino]: switch5: { id: 716782, unit: 0, all: true, state: false }
19:51:00debug [pimatic-homeduino]: switch4: { unit: 5, id: 26, state: true }
19:51:00debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 26, state: false }
19:51:00debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 26, state: true }
19:51:00debug [pimatic-homeduino]: received: [ 319, 980, 9824 ] 01100110010101100101010101010110010101100110011002
19:51:00debug [pimatic-homeduino]: data: "RF receive 319 980 9824 0 0 0 0 0 01100110010101100101010101010110010101100110011002"
19:50:59debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 7, all: false, state: true }
19:50:59debug [pimatic-homeduino]: received: [ 267, 1368, 10800 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000001010102
19:50:59debug [pimatic-homeduino]: data: "RF receive 267 1368 10800 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000001010102"
19:50:59debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: false, unit: 0 }
19:50:59debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: true, unit: 0 }
19:50:59debug [pimatic-homeduino]: received: [ 248, 1289, 2560, 10264 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010100000100010001000103
19:50:59debug [pimatic-homeduino]: data: "RF receive 248 2560 1289 10264 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020200000200020002000203"

Can anyone help me with some next steps?

Thanx,
Andreas

I see that your remote sends the commands in 3 different protocols. The protocol switch1, switch10 and the group around switch2/3.
How fit you are in pimatic configuration?
You should implement a switch device and test every showen switch protocol.

The FA500S are Elro devices, so i guess switch 2 or 3 will work.
stop pimatic and put this code into your devices section of your config.json. then restart pimatic and add your device to a page. then try to switch it.

   {
     "id": "fa500s",
     "name": "FA500S Plug",
     "class": "HomeduinoRFSwitch",
     "protocols": [
       {
         "name": "switch2",
         "options": {
           "houseCode": 5,
           "unitCode": 26
         }
       }
     ]
   },

guess this should do the job. if the state is inverted (you press on and the plug switches off, then use protocol name switch3, since this is the inverted protocol of switch2)

try this out and please report back! good luck

Hi, i got the same FA500S and tried the config in the config above.
But I can’t program the devices with the new code switching it on.

What else can I do?

I tried every protocol I could find in the homeduino output (switch1 / 2 / 3 / 4 / 5 / 7 / 10) but it didn’t work out
My pimatic / homeduino works in general (I have REV switches running with homeduino successfully) so it can’t be a HW / wiring problem.

Klaus has tried it too. Seems like there is something different at the protocol?
maybe @Icesory has a clue?

Hi, here are the debug codes:

AON:

22:27:39.449 [pimatic-homeduino] debug: data: "RF receive 379 1027 4982 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:39.463 [pimatic-homeduino] debug: received: [ 379, 1027, 4982 ] 0101100101100110011010100110010110100110011001100110100102
22:27:39.586 [pimatic-homeduino] debug: data: "RF receive 383 1031 4955 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:39.609 [pimatic-homeduino] debug: received: [ 383, 1031, 4955 ] 0101100101100110011010100110010110100110011001100110100102
22:27:39.722 [pimatic-homeduino] debug: data: "RF receive 375 1026 4973 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:39.736 [pimatic-homeduino] debug: received: [ 375, 1026, 4973 ] 0101100101100110011010100110010110100110011001100110100102
22:27:39.859 [pimatic-homeduino] debug: data: "RF receive 383 1025 4986 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:39.874 [pimatic-homeduino] debug: received: [ 383, 1025, 4986 ] 0101100101100110011010100110010110100110011001100110100102
22:27:39.995 [pimatic-homeduino] debug: data: "RF receive 376 1026 4967 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:40.010 [pimatic-homeduino] debug: received: [ 376, 1026, 4967 ] 0101100101100110011010100110010110100110011001100110100102
22:27:40.132 [pimatic-homeduino] debug: data: "RF receive 383 1028 4973 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:40.146 [pimatic-homeduino] debug: received: [ 383, 1028, 4973 ] 0101100101100110011010100110010110100110011001100110100102
22:27:40.268 [pimatic-homeduino] debug: data: "RF receive 383 1027 4956 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:40.283 [pimatic-homeduino] debug: received: [ 383, 1027, 4956 ] 0101100101100110011010100110010110100110011001100110100102
22:27:40.405 [pimatic-homeduino] debug: data: "RF receive 382 1028 4981 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:40.419 [pimatic-homeduino] debug: received: [ 382, 1028, 4981 ] 0101100101100110011010100110010110100110011001100110100102
22:27:40.542 [pimatic-homeduino] debug: data: "RF receive 381 1028 4970 0 0 0 0 0 0101100101100110011010100110010110100110011001100110100102"
22:27:40.556 [pimatic-homeduino] debug: received: [ 381, 1028, 4970 ] 0101100101100110011010100110010110100110011001100110100102

A OFF:

22:28:41.037 [pimatic-homeduino] debug: received: [ 377, 1037, 5035 ] 0101100101100101011001101001101010010110010101010110100102
22:28:41.159 [pimatic-homeduino] debug: data: "RF receive 376 1034 4985 0 0 0 0 0 0101100101100101011001101001101010010110010101010110100102"
22:28:41.173 [pimatic-homeduino] debug: received: [ 376, 1034, 4985 ] 0101100101100101011001101001101010010110010101010110100102
22:28:41.296 [pimatic-homeduino] debug: data: "RF receive 371 1029 4980 0 0 0 0 0 0101100101100101011001101001101010010110010101010110100102"
22:28:41.310 [pimatic-homeduino] debug: received: [ 371, 1029, 4980 ] 0101100101100101011001101001101010010110010101010110100102
22:28:41.433 [pimatic-homeduino] debug: data: "RF receive 374 1035 4981 0 0 0 0 0 0101100101100101011001101001101010010110010101010110100102"
22:28:41.446 [pimatic-homeduino] debug: received: [ 374, 1035, 4981 ] 0101100101100101011001101001101010010110010101010110100102
22:28:41.569 [pimatic-homeduino] debug: data: "RF receive 371 1028 4978 0 0 0 0 0 0101100101100101011001101001101010010110010101010110100102"
22:28:41.583 [pimatic-homeduino] debug: received: [ 371, 1028, 4978 ] 0101100101100101011001101001101010010110010101010110100102
22:28:41.706 [pimatic-homeduino] debug: data: "RF receive 374 1038 4993 0 0 0 0 0 0101100101100101011001101001101010010110010101010110100102"
22:28:41.722 [pimatic-homeduino] debug: received: [ 374, 1038, 4993 ] 0101100101100101011001101001101010010110010101010110100102

B ON:

22:29:25.867 [pimatic-homeduino] debug: data: "RF receive 378 1031 4987 0 0 0 0 0 0101100101100101011010011010100110100110011001010110011002"
22:29:25.881 [pimatic-homeduino] debug: received: [ 378, 1031, 4987 ] 0101100101100101011010011010100110100110011001010110011002
22:29:26.003 [pimatic-homeduino] debug: data: "RF receive 378 1027 4967 0 0 0 0 0 0101100101100101011010011010100110100110011001010110011002"
22:29:26.018 [pimatic-homeduino] debug: received: [ 378, 1027, 4967 ] 0101100101100101011010011010100110100110011001010110011002

B OFF:

22:29:47.423 [pimatic-homeduino] debug: received: [ 368, 1029, 4983 ] 0101100101100101101010101001010110100101010101101010011002
22:29:47.645 [pimatic-homeduino] debug: data: "RF receive 377 1035 4992 0 0 0 0 0 0101100101100101101010101001010110100101010101101010011002"
22:29:47.660 [pimatic-homeduino] debug: received: [ 377, 1035, 4992 ] 0101100101100101101010101001010110100101010101101010011002
22:29:47.782 [pimatic-homeduino] debug: data: "RF receive 378 1036 4984 0 0 0 0 0 0101100101100101101010101001010110100101010101101010011002"
22:29:47.797 [pimatic-homeduino] debug: received: [ 378, 1036, 4984 ] 0101100101100101101010101001010110100101010101101010011002

C ON:

22:31:14.093 [pimatic-homeduino] debug: data: "RF receive 1031 379 4984 0 0 0 0 0 0101011010010110101001010110011001010110011010011010100112"
22:31:14.107 [pimatic-homeduino] debug: received: [ 379, 1031, 4984 ] 1010100101101001010110101001100110101001100101100101011002
22:31:14.229 [pimatic-homeduino] debug: data: "RF receive 1026 375 4979 0 0 0 0 0 0101011010010110101001010110011001010110011010011010100112"
22:31:14.243 [pimatic-homeduino] debug: received: [ 375, 1026, 4979 ] 1010100101101001010110101001100110101001100101100101011002

C OFF:

22:31:37.306 [pimatic-homeduino] debug: received: [ 374, 1023, 4995 ] 1010100101101010100110101001101001011010010110100110011002
22:31:37.428 [pimatic-homeduino] debug: data: "RF receive 1031 384 4984 0 0 0 0 0 0101011010010101011001010110010110100101101001011001100112"
22:31:37.444 [pimatic-homeduino] debug: received: [ 384, 1031, 4984 ] 1010100101101010100110101001101001011010010110100110011002
22:31:37.564 [pimatic-homeduino] debug: data: "RF receive 1023 382 4996 0 0 0 0 0 0101011010010101011001010110010110100101101001011001100112"
22:31:37.578 [pimatic-homeduino] debug: received: [ 382, 1023, 4996 ] 1010100101101010100110101001101001011010010110100110011002

This pilight protocol doesn´t fit to your received data.
https://github.com/pilight/pilight/blob/development/libs/protocols/mumbi.c

@Icesory I think pilight is referencing to a different switch (http://wiki.pilight.org/doku.php/mumbi_v6_0 references to Mumbi switches with DIP-switches) - looks like Mumbi has changed the protocol.

It is a new protocol.
Here is the pilight thread about it
http://forum.pilight.org/Thread-Flamingo?page=7

It’s the FA500S with no dip switches. Sending the raw codes from Pilight forum does work. I can teach the switches with the raw codes.
Maybe a problem is the start of the code, where is a longer break of 4095us?

Here are the code from my remote as requestet:

A On:

21:26:03.291 [pimatic-homeduino] debug: data: "RF receive 503 1939 3894 9179 0 0 0 0 01020102020201020101010202010101010101010202020101020202010102010201010103"
21:26:03.303 [pimatic-homeduino] debug: received: [ 503, 1939, 3894, 9179 ] 01020102020201020101010202010101010101010202020101020202010102010201010103

A Off:

21:29:22.226 [pimatic-homeduino] debug: data: "RF receive 495 1942 3911 9224 0 0 0 0 01020102010102010202020102010101010101010202010101010201010102020102020203"
21:29:22.237 [pimatic-homeduino] debug: received: [ 495, 1942, 3911, 9224 ] 01020102010102010202020102010101010101010202010101010201010102020102020203

B on:

21:29:47.564 [pimatic-homeduino] debug: data: "RF receive 512 1929 3885 9185 0 0 0 0 01020102010201020102020102010201010101010102010101010101010201010201010103"
21:29:47.576 [pimatic-homeduino] debug: received: [ 512, 1929, 3885, 9185 ] 01020102010201020102020102010201010101010102010101010101010201010201010103

B off:

21:30:27.774 [pimatic-homeduino] debug: data: "RF receive 489 1952 3907 9223 0 0 0 0 01020102020202010101010102010101010101010202020201020202010102010201020203"
21:30:27.785 [pimatic-homeduino] debug: received: [ 489, 1952, 3907, 9223 ] 01020102020202010101010102010101010101010202020201020202010102010201020203

C on:

21:31:35.377 [pimatic-homeduino] debug: data: "RF receive 357 960 10259 0 0 0 0 0 01010110011001010101010101100110010101100110011002"
21:31:35.390 [pimatic-homeduino] debug: received: [ 357, 960, 10259 ] 01010110011001010101010101100110010101100110011002

C off:

21:36:49.286 [pimatic-homeduino] debug: data: "RF receive 373 945 10264 0 0 0 0 0 01010110011001010101010101100110010101100110010102"
21:36:49.299 [pimatic-homeduino] debug: received: [ 373, 945, 10264 ] 01010110011001010101010101100110010101100110010102

D on:

21:32:39.599 [pimatic-homeduino] debug: data: "RF receive 342 970 482 10294 0 0 0 0 01010110011001010101010101210101010101100110011003"
21:32:39.610 [pimatic-homeduino] debug: received: [ 342, 482, 970, 10294 ] 02020220022002020202020202120202020202200220022003

D off:

21:33:06.753 [pimatic-homeduino] debug: data: "RF receive 352 965 10297 0 0 0 0 0 01010110011001010101010101010101010101100110010102"
21:33:06.764 [pimatic-homeduino] debug: received: [ 352, 965, 10297 ] 01010110011001010101010101010101010101100110010102

I hope this helps.

When sending the commands (I wired the transmitter directly to the pi, the receiver is wired to the arduino --> I can send commands and receive the data in parallel) using the shell script mentioned above, I receive the following odes with homeduino:

Send Codes (Raw, using pilight-send)

AON:   330 4940 330 1000 320 1010 970 360 320 1010 310 1010 970 370 320 1010 970 360 320 1010 970 370 960 370 960 360 320 1010 970 380 310 1020 300 1020 960 370 960 380 310 1020 960 370 310 1010 970 380 300 1030 950 380 300 1020 960 380 950 370 310 1020
AOFF:  320 4950 330 1000 320 1010 970 360 320 1010 320 1000 980 370 310 1010 320 1020 310 1010 970 370 320 1010 970 360 970 360 310 1030 960 370 960 360 970 360 320 1020 320 1010 970 360 310 1020 310 1040 300 1020 310 1020 310 1010 970 370 960 370 310 1020
B ON:  330 4950 320 1010 320 1000 980 350 330 1010 310 1010 980 360 320 1010 320 1010 320 1010 970 370 970 360 320 1010 970 360 970 370 970 360 310 1030 950 370 960 380 310 1020 960 370 310 1020 960 370 320 1020 310 1010 310 1020 960 380 310 1010 960 370
B OFF: 320 4950 320 1010 320 1000 980 350 330 1000 320 1020 960 370 320 1020 310 1010 970 360 970 370 970 360 970 360 960 370 310 1030 310 1020 310 1020 960 360 970 370 310 1030 300 1020 310 1020 310 1030 310 1020 960 370 960 370 960 370 310 1010 970 370
C ON:  320 4950 980 350 970 360 970 360 320 1010 320 1010 970 370 960 370 310 1020 310 1020 310 1030 960 360 970 360 970 370 300 1030 960 370 310 1020 960 370 960 390 950 370 310 1020 960 370 300 1040 300 1030 950 380 300 1030 300 1030 300 1020 960 370
C OFF: 320 4950 970 360 970 360 970 360 310 1020 310 1010 970 370 970 360 970 360 970 360 320 1030 960 360 970 370 950 370 310 1040 950 370 960 370 310 1020 310 1030 960 370 960 370 300 1030 300 1030 960 370 960 370 310 1030 950 380 300 1020 960 370

Received by Homeduino:

A ON: [ 380, 1023, 5020 ] 0101100101100110011010100110010110100110011001100110100102
A OFF:[ 366, 1036, 5000 ] 0101100101100101011001101001101010010110010101010110100102
B ON: [ 375, 1029, 5024 ] 0101100101100101011010011010100110100110011001010110011002
B OFF:[ 371, 1033, 5012 ] 0101100101100101101010101001010110100101010101101010011002
C ON: [ 374, 1027, 5024 ] 1010100101101001010110101001100110101001100101100101011002
C OFF:[ 383, 1018, 5008 ] 1010100101101010100110101001101001011010010110100110011002

What I don’t understand: The first pulses send are “320 4950”. Shouldn’t they appear in the begining of the received codes - not at the end?

Anyhow - according to
http://wiki.pilight.org/doku.php/elro_flamingo
and
http://forum.arduino.cc/index.php?topic=201771.15
the pulses can be mapped to binary code:

• Bit 0 is 1 pulse HIGH and 3 pulses LOW
• Bit 1 is 3 pulses HIGH and 1 pulse LOW

Am I right that it would mean

• ‘10’ --> Binary 0
• ‘01’ --> Binary 1

Then the binary code (without the footer) would be

A ON  1101101010001011001010101001
A OFF 1101101110100100011011111001
B ON  1101101110010001001010111010
B OFF 1101101100000111001111100010
C ON  0001100111000101000101101110
C OFF 0001100001000100110011001010

Are my thoughts correct to this point (I am a newbie trying to understand ) ? …and what would be the next steps?

You all used the script from pilight. These codes I have striped down to the last bit but it is not from one remote. Has any one the real remote for this plugs?

@Icesory I am not quite sure what you need. When pressing the buttons on the (original) remote control, I get

A ON

19:54:39debug [pimatic-homeduino]: led1: { id: 1433565, unit: 2, state: true }
19:54:39debug [pimatic-homeduino]: contact2: { id: 716782, contact: false }
19:54:39debug [pimatic-homeduino]: pir1: { unit: 5, id: 26, presence: true }
19:54:39debug [pimatic-homeduino]: switch7: { unit: 2, id: 7, state: false }
19:54:39debug [pimatic-homeduino]: switch5: { id: 716782, unit: 0, all: true, state: false }
19:54:39debug [pimatic-homeduino]: switch4: { unit: 5, id: 26, state: true }
19:54:39debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 26, state: false }
19:54:39debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 26, state: true }
19:54:39debug [pimatic-homeduino]: received: [ 319, 981, 9828 ] 01100110010101100101010101010110010101100110011002
19:54:39debug [pimatic-homeduino]: data: "RF receive 319 981 9828 0 0 0 0 0 01100110010101100101010101010110010101100110011002"
19:54:39debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 7, all: false, state: true }
19:54:39debug [pimatic-homeduino]: received: [ 266, 1370, 10804 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000001010102
19:54:39debug [pimatic-homeduino]: data: "RF receive 266 1370 10804 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000001010102"

A OFF

19:54:59debug [pimatic-homeduino]: led1: { id: 1433565, unit: 3, state: true }
19:54:59debug [pimatic-homeduino]: contact2: { id: 716782, contact: false }
19:54:59debug [pimatic-homeduino]: pir1: { unit: 5, id: 26, presence: true }
19:54:59debug [pimatic-homeduino]: switch7: { unit: 2, id: 7, state: false }
19:54:59debug [pimatic-homeduino]: switch5: { id: 716782, unit: 0, all: true, state: true }
19:54:59debug [pimatic-homeduino]: switch4: { unit: 5, id: 26, state: false }
19:54:59debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 26, state: true }
19:54:59debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 26, state: false }
19:54:59debug [pimatic-homeduino]: received: [ 317, 982, 9824 ] 01100110010101100101010101010110010101100110010102
19:54:59debug [pimatic-homeduino]: data: "RF receive 317 982 9824 0 0 0 0 0 01100110010101100101010101010110010101100110010102"
19:54:59debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 7, all: false, state: false }
19:54:59debug [pimatic-homeduino]: received: [ 266, 1369, 10804 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000001010102
19:54:59debug [pimatic-homeduino]: data: "RF receive 266 1369 10804 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000001010102"
19:54:59debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: true, unit: 0 }
19:54:58debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: false, unit: 0 }
19:54:58debug [pimatic-homeduino]: received: [ 248, 1290, 2556, 10264 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010001000100010001000103
19:54:58debug [pimatic-homeduino]: data: "RF receive 248 2556 1290 10264 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020002000200020002000203"

B ON

19:56:14debug [pimatic-homeduino]: led1: { id: 1433469, unit: 2, state: true }
19:56:14debug [pimatic-homeduino]: contact2: { id: 716734, contact: false }
19:56:14debug [pimatic-homeduino]: pir1: { unit: 5, id: 22, presence: true }
19:56:14debug [pimatic-homeduino]: switch7: { unit: 2, id: 3, state: false }
19:56:14debug [pimatic-homeduino]: switch5: { id: 716734, unit: 0, all: true, state: false }
19:56:14debug [pimatic-homeduino]: switch4: { unit: 5, id: 22, state: true }
19:56:14debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 22, state: false }
19:56:14debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 22, state: true }
19:56:14debug [pimatic-homeduino]: received: [ 318, 981, 9828 ] 01100110010101100101010101100101010101100110011002
19:56:14debug [pimatic-homeduino]: data: "RF receive 318 981 9828 0 0 0 0 0 01100110010101100101010101100101010101100110011002"
19:56:14debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 11, all: false, state: true }
19:56:14debug [pimatic-homeduino]: received: [ 266, 1370, 10800 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000100010102
19:56:14debug [pimatic-homeduino]: data: "RF receive 266 1370 10800 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000100010102"
19:56:13debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: false, unit: 1 }
19:56:13debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: true, unit: 1 }
19:56:13debug [pimatic-homeduino]: received: [ 248, 1291, 2560, 10268 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010100000100010001010003
19:56:13debug [pimatic-homeduino]: data: "RF receive 248 2560 1291 10268 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020200000200020002020003"

B OFF

19:56:31debug [pimatic-homeduino]: led1: { id: 1433469, unit: 3, state: true }
19:56:31debug [pimatic-homeduino]: contact2: { id: 716734, contact: false }
19:56:31debug [pimatic-homeduino]: pir1: { unit: 5, id: 22, presence: true }
19:56:31debug [pimatic-homeduino]: switch7: { unit: 2, id: 3, state: false }
19:56:31debug [pimatic-homeduino]: switch5: { id: 716734, unit: 0, all: true, state: true }
19:56:31debug [pimatic-homeduino]: switch4: { unit: 5, id: 22, state: false }
19:56:31debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 22, state: true }
19:56:31debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 22, state: false }
19:56:31debug [pimatic-homeduino]: received: [ 317, 982, 9824 ] 01100110010101100101010101100101010101100110010102
19:56:31debug [pimatic-homeduino]: data: "RF receive 317 982 9824 0 0 0 0 0 01100110010101100101010101100101010101100110010102"
19:56:31debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 11, all: false, state: false }
19:56:31debug [pimatic-homeduino]: received: [ 266, 1369, 10800 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000100010102
19:56:31debug [pimatic-homeduino]: data: "RF receive 266 1369 10800 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000100010102"
19:56:31debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: true, unit: 1 }
19:56:31debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: false, unit: 1 }
19:56:31debug [pimatic-homeduino]: received: [ 248, 1290, 2556, 10264 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010001000100010001010003
19:56:31debug [pimatic-homeduino]: data: "RF receive 248 2556 1290 10264 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020002000200020002020003"

C ON

19:55:55debug [pimatic-homeduino]: led1: { id: 1433437, unit: 2, state: true }
19:55:55debug [pimatic-homeduino]: contact2: { id: 716718, contact: false }
19:55:55debug [pimatic-homeduino]: pir1: { unit: 5, id: 18, presence: true }
19:55:55debug [pimatic-homeduino]: switch7: { unit: 2, id: 3, state: false }
19:55:55debug [pimatic-homeduino]: switch5: { id: 716718, unit: 0, all: true, state: false }
19:55:55debug [pimatic-homeduino]: switch4: { unit: 5, id: 18, state: true }
19:55:55debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 18, state: false }
19:55:55debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 18, state: true }
19:55:55debug [pimatic-homeduino]: received: [ 320, 979, 9824 ] 01100110010101100101010101100110010101100110011002
19:55:55debug [pimatic-homeduino]: data: "RF receive 320 979 9824 0 0 0 0 0 01100110010101100101010101100110010101100110011002"
19:55:55debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 13, all: false, state: true }
19:55:55debug [pimatic-homeduino]: received: [ 266, 1370, 10804 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000101000102
19:55:55debug [pimatic-homeduino]: data: "RF receive 266 1370 10804 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000101000102"
19:55:55debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: false, unit: 2 }
19:55:55debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: true, unit: 2 }
19:55:55debug [pimatic-homeduino]: received: [ 248, 1289, 2560, 10268 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010100000100010100000103
19:55:55debug [pimatic-homeduino]: data: "RF receive 248 2560 1289 10268 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020200000200020200000203"

C OFF

19:55:38debug [pimatic-homeduino]: led1: { id: 1433437, unit: 3, state: true }
19:55:38debug [pimatic-homeduino]: contact2: { id: 716718, contact: false }
19:55:38debug [pimatic-homeduino]: pir1: { unit: 5, id: 18, presence: true }
19:55:38debug [pimatic-homeduino]: switch7: { unit: 2, id: 3, state: false }
19:55:38debug [pimatic-homeduino]: switch5: { id: 716718, unit: 0, all: true, state: true }
19:55:38debug [pimatic-homeduino]: switch4: { unit: 5, id: 18, state: false }
19:55:38debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 18, state: true }
19:55:38debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 18, state: false }
19:55:38debug [pimatic-homeduino]: received: [ 318, 980, 9828 ] 01100110010101100101010101100110010101100110010102
19:55:38debug [pimatic-homeduino]: data: "RF receive 318 980 9828 0 0 0 0 0 01100110010101100101010101100110010101100110010102"
19:55:38debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 13, all: false, state: false }
19:55:38debug [pimatic-homeduino]: received: [ 265, 1370, 10804 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000101000102
19:55:38debug [pimatic-homeduino]: data: "RF receive 265 1370 10804 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000101000102"
19:55:37debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: true, unit: 2 }
19:55:37debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: false, unit: 2 }
19:55:37debug [pimatic-homeduino]: received: [ 248, 1291, 2560, 10268 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010001000100010100000103
19:55:37debug [pimatic-homeduino]: data: "RF receive 248 2560 1291 10268 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020002000200020200000203"
19:55:37debug [pimatic-homeduino]: received: [ 325, 973, 4940 ] 1010100101100101100101101010010110100101010110100110011002
19:55:37debug [pimatic-homeduino]: data: "RF receive 973 325 4940 0 0 0 0 0 0101011010011010011010010101101001011010101001011001100112"

D ON

19:52:30debug [pimatic-homeduino]: led1: { id: 1433085, unit: 2, state: true }
19:52:30debug [pimatic-homeduino]: contact2: { id: 716542, contact: false }
19:52:30debug [pimatic-homeduino]: pir1: { unit: 5, id: 14, presence: true }
19:52:30debug [pimatic-homeduino]: switch7: { unit: 2, id: 5, state: false }
19:52:30debug [pimatic-homeduino]: switch5: { id: 716542, unit: 0, all: true, state: false }
19:52:30debug [pimatic-homeduino]: switch4: { unit: 5, id: 14, state: true }
19:52:30debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 14, state: false }
19:52:30debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 14, state: true }
19:52:30debug [pimatic-homeduino]: received: [ 318, 981, 9828 ] 01100110010101100101011001010101010101100110011002
19:52:30debug [pimatic-homeduino]: data: "RF receive 318 981 9828 0 0 0 0 0 01100110010101100101011001010101010101100110011002"
19:52:30debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 14, all: false, state: true }
19:52:30debug [pimatic-homeduino]: received: [ 266, 1370, 10808 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000101010002
19:52:30debug [pimatic-homeduino]: data: "RF receive 266 1370 10808 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010100000100000101010002"
19:52:30debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: false, unit: 3 }
19:52:30debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: true, unit: 3 }
19:52:30debug [pimatic-homeduino]: received: [ 248, 1289, 2560, 10264 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010100000100010100010003
19:52:29debug [pimatic-homeduino]: data: "RF receive 248 2560 1289 10264 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020200000200020200020003"

D OFF

19:53:03debug [pimatic-homeduino]: led1: { id: 1433085, unit: 3, state: true }
19:53:03debug [pimatic-homeduino]: contact2: { id: 716542, contact: false }
19:53:03debug [pimatic-homeduino]: pir1: { unit: 5, id: 14, presence: true }
19:53:03debug [pimatic-homeduino]: switch7: { unit: 2, id: 5, state: false }
19:53:03debug [pimatic-homeduino]: switch5: { id: 716542, unit: 0, all: true, state: true }
19:53:03debug [pimatic-homeduino]: switch4: { unit: 5, id: 14, state: false }
19:53:03debug [pimatic-homeduino]: switch3: { houseCode: 5, unitCode: 14, state: true }
19:53:03debug [pimatic-homeduino]: switch2: { houseCode: 5, unitCode: 14, state: false }
19:53:03debug [pimatic-homeduino]: received: [ 317, 982, 9824 ] 01100110010101100101011001010101010101100110010102
19:53:03debug [pimatic-homeduino]: data: "RF receive 317 982 9824 0 0 0 0 0 01100110010101100101011001010101010101100110010102"
19:53:03debug [pimatic-homeduino]: switch10: { id: 2042262755, unit: 14, all: false, state: false }
19:53:03debug [pimatic-homeduino]: received: [ 266, 1369, 10804 ] 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000101010002
19:53:03debug [pimatic-homeduino]: data: "RF receive 266 1369 10804 0 0 0 0 0 01010000000101010100000001010101000001010001010100010000010101000100000101010000000101010001010001000100000101010002"
19:53:03debug [pimatic-homeduino]: contact1: { id: 2667522, all: false, contact: true, unit: 3 }
19:53:03debug [pimatic-homeduino]: switch1: { id: 2667522, all: false, state: false, unit: 3 }
19:53:03debug [pimatic-homeduino]: received: [ 248, 1288, 2560, 10260 ] 020001000100010001010000010100000100010001010000010100010000010100000100010001000100010001000100010100000100010001000100010100010003
19:53:03debug [pimatic-homeduino]: data: "RF receive 248 2560 1288 10260 0 0 0 0 010002000200020002020000020200000200020002020000020200020000020200000200020002000200020002000200020200000200020002000200020200020003"

Or do you need the raw data before homeduino processes them?

It looks like homeduino isnt able to receive the transmission.
I think we must wait until the pilight protocol is ready. Than i can create a copy of this.

@Icesory said:

must wait until the pilight protocol is ready. Than i can create a copy

Is there an update on this?

Also have some of these laying around and would be interested in a deciphered protocol. I put some effort into decoding and arangeing the known sequences of the remotes but I could not yet decipher it.

See:
http://forum.pilight.org/Thread-Flamingo?pid=15247#pid15247

Anything new on this topic?
The guys on arduino forums are working on it :
http://forum.arduino.cc/index.php?topic=201771.60

By the way, is there a way wo send raw codes with homeduino?
As a quick workaround…
When I used homeduino with pilight i had a script with the captured codes from the remote, but now i can`t send raw codes…