How often receives pimatic the rf message?
-
[Solved] Doorbell Select Plus
pimatic rocks!!!
-
@Icesory each time i press the button i see 1 occurrence of switch 6 and 1 of switch 8
pimatic rocks!
-
Then it is possible that pimatic repeats the message to often.
You can in the plugin section of homeduino define how often the message is repeated."rfrepeats":4
pimatic rocks!!!
-
@Icesory i tried several times with “rfrepeats”:4
16:45:49.272 [pimatic-homeduino] debug: Sending Pin:5 Repeats: 4 Protocol: switch6 16:45:50.491 [pimatic-homeduino] debug: data: "ACK" 16:45:55.189 [pimatic-homeduino] debug: Sending Pin:5 Repeats: 4 Protocol: switch6 16:45:55.288 [pimatic-homeduino] debug: data: "ACK" 16:45:59.254 [pimatic-homeduino] debug: Sending Pin:5 Repeats: 4 Protocol: switch8 16:45:59.377 [pimatic-homeduino] debug: data: "ACK" 16:46:00.016 [pimatic-homeduino] debug: data: "ACK 19.1 57.0" 16:46:02.134 [pimatic-homeduino] debug: Sending Pin:5 Repeats: 4 Protocol: switch8 16:46:03.414 [pimatic-homeduino] debug: data: "ACK" 16:46:06.324 [pimatic-homeduino] debug: Sending Pin:5 Repeats: 4 Protocol: switch8 16:46:06.442 [pimatic-homeduino] debug: data: "ACK" 16:46:08.556 [pimatic-homeduino] debug: Sending Pin:5 Repeats: 4 Protocol: switch8
But still no luck
pimatic rocks!
-
@Icesory i did a pull request here https://github.com/pimatic/rfcontroljs/pull/48 should work…
pimatic rocks!
-
@jarnoglenn How did you get this to work?
I have the same doorbell and I can receive the pir-output in debug mode.
I added the HomeduinoRFPir lines to the config, but I can’t figure out how to let pimatic send the signal to ring the doorbell. I tried rules like “if […] then switch on pir4”, but this does not work. Can you help me out? -
A send function isnt implemented at the moment.
Do you need this?pimatic rocks!!!
-
@Icesory . A send function would be very nice (so not a PIR but a CHIME). This way I could ring the bel at the backdoor if someone is at the front door. (Very handy if i’m in the garden and the postman rings to deliver some chinese packages
-
Yes, a send function would be very nice indeed! I can’t hear the front door bell when i’m upstairs, so i want to repeat the signal there.
-
ok ok guys. I will change this protocol to an switch protocol. But i must change some little things in the pir sensor.
pimatic rocks!!!