@koffienl
A sample is running. I have test it before. Without problems. With websever, I can Led turn on or led turn off.
-
Installation problems
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
It was a problem of boardmanager. Now I used the 2.0.0 version, and I can upload the ESPimatic. But now I come only to the Upload Page. A Page with “select Files” and “Updata” -Butons. After I push the “Update”- Button, I become a “OK” and no more.
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
You need to upload the Html and bootstrap files to the spiffs now. There is a folder “upload this to spiff” in the repo. When done reboot the esp (power off / on) then you should be able to reach the gui by calling the ip of the esp in a browser.
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
Hi,
after entering IP, first I become this:and then select file and after press UPDATE, I become this:
And no more.
Maybe, the low memory is the reason?"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
Using the 512kB flash?
Could be, when uploading all files.
Actually I don’t know how espimatic reacts on low spiff space, whether there will be an error or message.
So now you are having the files on the flash and a reboot does not help?
Can you access 192.168.178.58/root.html ?pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
At the moment I have only 512 kb available. An error message I’m not getting. Reboot I have tried . With the same result.
I did not know that there are other pages on the Web server that I can call . I 'll try it in the evening."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
i just installed espimatic v0.26 on a 512kB esp01 with 64MB Spiffs.
it works! i gzipped all files like you did (with maximum compression) and uploaded them to the spiffs. even with the zipped files the esp reacts very fast. cannot see any difference to the common installation with non zipped files.now having 92% space used andi can access the esp and it works without issues.
at the first boot i was able to access the isp directly with its ip adress. after i renamed the device in the setup, i now am only able to access the menu with http://IPadress/root.html
but that does not matter imo. installed a dht22, works as expected!
the disadvantage of the esp01 - you are only having 2 gpiopimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
Thank many, now it functions. I reach the side with the settings. Maybe this should be mentioned in the Wiki on GitHub which one should call ip/root.html. I was clueless once more really. Many thanks once more. Has really helped me.
Now I must only consider for which I use this. I think first sometimes a DHT22 tag on."Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)
-
nice to hear
then have fun with espimatic.
hopefully koffienl will come up with the new v0.2 soonpimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
I think a connection to I2C is a nice option.
"Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." 09-28-2003, LINUS TORVALDS (http://www.nytimes.com)