my plugin config:
“plugin”: “maxcul”,
“serialPortName”: “/dev/ttyACM0”,
“baudrate”: 9600,
“homebaseAddress”: “123456”
my device config:
“id”: “test_thermostat”,
“name”: “Test Thermostat (0673b4)”,
“class”: “MaxculHeatingThermostat”,
“deviceId”: “0673b4”,
“groupId”: “01”,
“comfyTemp”: 21,
“ecoTemp”: 17,
“guiShowTemperatueInput”: true,
“guiShowModeControl”: true,
“guiShowPresetControl”: true
maxcul.log:
17:05:48.783 [pimatic] info: Loading plugin: “pimatic-maxcul” (0.2.0)
17:05:52.984 [pimatic-maxcul] info: using serial device /dev/ttyACM0@9600
17:05:52.987 [pimatic-maxcul] info: trying to open serialport…
17:05:53.980 [pimatic-maxcul] info: serialPort /dev/ttyACM0 is open!
17:05:54.000 [pimatic-maxcul] info: enable MAX! Mode of the CUL868
17:05:54.394 [pimatic-maxcul] debug: got data -> V 1.61 CUL868
17:05:54.399 [pimatic-maxcul] info: CUL VERSION: V 1.61 CUL868
17:12:03.971 [pimatic-maxcul] debug: got data -> Z170004000673B4123456001601FF4A455130363931373430
17:12:03.983 [pimatic-maxcul] debug: decoding Message Z170004000673B4123456001601FF4A455130363931373430
17:12:04.010 [pimatic-maxcul] debug: handling PairPing packet
17:12:04.015 [pimatic-maxcul] debug: beginn repairing with device 0673b4
17:12:04.050 [pimatic-maxcul] info: Send Packet to CUL: 0B0100011234560673B40000
17:12:04.050 [pimatic-maxcul] info:>
17:12:04.111 [pimatic-maxcul] info: send done !
17:12:05.116 [pimatic-maxcul] debug: got data -> Z0E0102020673B41234560001993C2A
17:12:05.133 [pimatic-maxcul] debug: decoding Message Z0E0102020673B41234560001993C2A
17:12:05.138 [pimatic-maxcul] debug: got OK-ACK Packet from 0673b4
something is not correct, the paring is unsuccessful…
who has an idea?
.