i use a couple AB440s socket switches to control lights, and sometimes i have a problem that they won’t switch.
I think it’s something with my cabling or soldering, because when i touch the antenna it works sometimes.
Don’t get me wrong the switching works 70% of the time but then it just fails, no debug output, all good but the socket switch doesnt do anything.
I bought this antenna:
I cut off the connector and soldered the “inner” contact to my 433mhz sender, i just removed the shielding.
So my questin is: did I do anyting wrong here?
I use the pimatic homeduino setup and use this sender/receiver kit i believe:
On the Receiver i just have a piece of cable and can receive everything in the whole house and garden with no problems.
thank you for your help!!