Cannot find module 'jqmthemer'

---

Hello,
Ich habe versucht Pimatic manuell zu installieren. Bei mir läuft Raspian und ein Raspi der 2ten Generation.
Ich konnte über meine festgelegten Logindaten im config-File auf der “Webseite” anmelden. Jedoch steht bei mir auf der Startseite wenn http://rasp_pi/ aufrufe “Cannot GET /”.
Im Logfile habe ich dann gefunden, dass das Module jqmthemer nicht gefunden wurde.

Ist das Modul jqmthemer für den Betrieb relevant?
Was kann ich tun, damit ich pimatic zum Laufen bekomme?

Danke und Grüße,
Skeelo

hello and welcome to pimatic : )
if possible pls. write in english.

you can try the following :
shut down pimatic and go to the node_modules/pimatic folder and use the command npm install. start pimatic again.

Hi,
thanks for you fast response. I performed the commands you mentioned obove. An error was given out:

npm ERR! Error: ENOSPC, mkdir '/home/pi/tmp/npm-2681-RN8Qc0iZ’
npm ERR! If you need help, you may report this entire log,
npm ERR! including the npm and node versions, at:
npm ERR!

npm ERR! System Linux 3.18.11-v7+
npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install"
npm ERR! cwd /home/pi/pimatic-app/node_modules/pimatic
npm ERR! node -v v0.10.24
npm ERR! npm -v 1.3.21
npm ERR! path /home/pi/tmp/npm-2681-RN8Qc0iZ
npm ERR! code ENOSPC
npm ERR! errno 54
npm ERR! Error: ENOSPC, write
npm ERR! If you need help, you may report this entire log,
npm ERR! including the npm and node versions, at:
npm ERR!

npm ERR! System Linux 3.18.11-v7+
npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "install"
npm ERR! cwd /home/pi/pimatic-app/node_modules/pimatic
npm ERR! node -v v0.10.24
npm ERR! npm -v 1.3.21
npm ERR! code ENOSPC
npm ERR! errno 54
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/pi/pimatic-app/node_modules/pimatic/npm-debug.log
npm ERR! not ok code 0

should I write this into Github? Is the thread here correct?

Thanks in advance again

BR,
Skeelo

asking for help at the forum is totally right well, you can try it with sudo npm install
if this does not work i suggest to install pimatic again. maybe anybody else has a better idea?

ENOSPC normally says that there is no space left to execute the command, whereas errno 54 is a “connection reset by peer”. Well, they may be related.

Is your partition/cwd mounted read only?

sorry. I already started to download the latest raspian. i would like to use the pimatic installer for next try to get pimatic to run. thanks so far…

@skeelo you’re welcome. Just keep us updated on your progress.

@Markus-Plessing thanks for response. I will open a new thread cause i got another problem with pimatic installer.