If you’re on a NANO connect the RF transmitter and receiver together is the signal from the RF transmitter mutilated by the interrupt of the connected RF Receiver.
Therefore, I would like to connect the transmitter directly to the raspberry and the receiver via the NANO.
-
RF transmitter directly connect to the raspberry and the receiver via the NANO.
-
@Wim-uit-Twente you are wrong. RFControl detache the receiver interrupt before sending
https://github.com/pimatic/RFControl/blob/master/RFControl.cpp#L497And your suggestion would be relatively difficult to implement.
pimatic rocks!!!
-
If I have the RF Receiver torque of the NANO and link 10 x 10 x to a led lamp then it goes well. With the RF Receiver is connected, it is more like 2 x wrong. The problem is the clearest present at a ’ rolling1 ’ command.
-
You should try to update your Homeduino Sketch on the arduino.
But generally, when a other rf transmission is in the air and you try to send yours. The both transmission collide and can’t receive correct.
pimatic rocks!!!