Hello,
I receive following debug data with my 433MHz receiver:
debug [pimatic-homeduino]: weather5: { id: 128, battery: 'Good', rain: 18.25 }
debug [pimatic-homeduino]: weather1: { id: 22, channel: 1, temperature: -176, humidity: 10, battery: 'Good' }
debug [pimatic-homeduino]: received: [ 484, 2009, 4043, 9027 ] 01010101010101020102020102020101020101020101020101010101010101010201020103
debug [pimatic-homeduino]: data: "RF receive 484 2009 4043 9027 0 0 0 0 01010101010101020102020102020101020101020101020101010101010101010201020103"
In my config I have following entries:
"id": "weatherstation",
"name": "Weather Rain",
"class": "HomeduinoRFWeatherStation",
"protocols": [
{
"name": "weather5",
"options": {
"id": 128
}
}
],
"values": [
"rain"
]
},
{
"id": "weatherstation2",
"name": "Weather Battery",
"class": "HomeduinoRFWeatherStation",
"protocols": [
{
"name": "weather5",
"options": {
"id": 128
}
}
],
"values": [
"battery"
]
}
The rain data I can see on my pimatic page, but how to observe the battery status. In the log file I can find following entry:
23:32:59.061 [pimatic] info: new device "Weather Rain"...
23:32:59.190 [pimatic] error: Error loading device weatherstation2: Values should be one of: rain, humidity, temperature, windDirection, avgAirspeed, windGust
unknown message received: running on a raspberrypi
23:33:03.794 [pimatic-homeduino] info: Connected to homeduino device.
Where is my fault? The device is a Ventus rain gauge.