i have build a new homeduino sender/receiver with better components (SRX882 & STX882).
Homeduino is flashed and i get “ready” from the /dev/ttyUSB1 with “screen /dev/ttyUSB1 115200”.
The wiring is correct and CS and VCC are bridged on the receiver.
The problem is. i dont get a “/dev/serial/by-id” symlink for this arduino and i cant connect it with pimatic.
[ 3.650598] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 - old homeduino arduino [ 4.037510] usb 1-1.4.1: ch341-uart converter now attached to ttyUSB1 - new homduino arduino [ 4.046592] usb 1-1.4.4: ch341-uart converter now attached to ttyUSB2 - mysensors gw