Hello,
last week i received my ATmega 328 Board and i followed some really good guides.
Right now i can receive on my pimatic gui some signals from my remote controlled switches.
But i’m not able to find the rigth id to controll the switch over pimatic gui.
debug [pimatic-homeduino]: doorbell1: { id: 4085, unit: 1399, state: true }
16:44:48debug [pimatic-homeduino]: led4: { id: 20481, command: ‘code:00010101’ }
16:44:48debug [pimatic-homeduino]: led3: { id: 20481, command: ‘magenta’ }
16:44:48debug [pimatic-homeduino]: led2: { id: 20481, command: ‘code:00010101’ }
16:44:48debug [pimatic-homeduino]: led1: { id: 20481, command: ‘code:00010101’ }
16:44:48debug [pimatic-homeduino]: contact3: { id: 720878, contact: false }
16:44:48debug [pimatic-homeduino]: contact2: { id: 720878, contact: false }
16:44:48debug [pimatic-homeduino]: pir1: { unit: 7, id: 26, presence: true }
16:44:48debug [pimatic-homeduino]: switch22: { id: 720878, command: undefined }
16:44:48debug [pimatic-homeduino]: switch16: { id: ‘C’, unit: 1, state: false }
16:44:47debug [pimatic-homeduino]: switch15: { id: 327697, unit: 3, state: false, all: false }
16:44:47debug [pimatic-homeduino]: switch7: { unit: 6, id: 7, state: false }
16:44:47debug [pimatic-homeduino]: switch5: { id: 720878, unit: 0, all: true, state: false }
16:44:47debug [pimatic-homeduino]: switch4: { unit: 7, id: 26, state: true }
16:44:47debug [pimatic-homeduino]: switch3: { houseCode: 7, unitCode: 26, state: false }
16:44:47debug [pimatic-homeduino]: switch2: { houseCode: 7, unitCode: 26, state: true }
16:44:47debug [pimatic-homeduino]: received: [ 360, 956, 10256 ] 01100110010101010101010101010110010101100110011002
16:44:47debug [pimatic-homeduino]: data: “RF receive 360 956 10256 0 0 0 0 0 01100110010101010101010101010110010101100110011002”
sometimes i get this:
debug [pimatic-homeduino]: contact1: { id: 181952, all: false, contact: false, unit: 1 }
16:48:00debug [pimatic-homeduino]: pir5: { id: 181952, all: false, presence: true, unit: 1 }
16:48:00debug [pimatic-homeduino]: switch1: { id: 181952, all: false, state: true, unit: 1 }
16:48:00debug [pimatic-homeduino]: received: [ 228, 308, 1348, 2764, 10836 ] 030102010201020002010201020102010202010102020102010102010200020201020101020201020101020102010201020102000201020201010201020102020104
16:48:00debug [pimatic-homeduino]: data: "RF receive 228 2764 308 1348 10836 0 0 0 01020302030203000302030203020302030302020303020302020302030003030203020203030203020203020302030203020
my config file
{
"id": "Licht1",
"name": "Test",
"class": "HomeduinoRFSwitch",
"protocols": [
{
"name": "switch3",
"options": {
"houseCode": 7,
"unitCode": 26
}
}
]
}
],
i tried a couple of settings but nothing works.
So maybe someone has an idea. The switches i am using are m-FS300 mumbi.
Thanks a lot