@fabikrauss no failure we are all learning from each other here! For your smart TVs I am pretty sure you can turn them on via wakeonlan (not sure if wifi is supported though) for the rest you can probably have a look at https://github.com/immosmart/smartbox
-
Wake on Lan Script [first try]
Pimatic, smart home made by smart folks, for the rest of us!
-
I should have added this, you can probably use a network monitor to see what calls your android or iphone makes to the TV (I assume you have an App to control the TVs).
Pimatic, smart home made by smart folks, for the rest of us!
-
@sebastienvg
Which Programm can I use to monetoring my network. Some Ideas? -
@fabikrauss are you able to control your TVs from the browser (let’s say chrome it would be a little easier)? If not then you can monitor with something like https://www.wireshark.org/
Pimatic, smart home made by smart folks, for the rest of us!
-
It posible to controll it with apps via Network for example one is called: Samsung smart view
-
@fabikrauss can you try to browse the IP of one your TVs?
Pimatic, smart home made by smart folks, for the rest of us!
-
@sebastienvg
the answer is 404 - Not Found -
@fabikrauss good news that means something is running on that port you just have to find the API now! Your best bet is probably somewhere http://www.samsungdforum.com/
Pimatic, smart home made by smart folks, for the rest of us!
-
@fabikrauss Were you able to wake the TVs via wakeonlan assuming they have ethernet cables?
Pimatic, smart home made by smart folks, for the rest of us!
-
No net so far but there is a dlan plug between