[pimatic-max]MAX! all in one dummy device possible?
I use MAX! in all rooms one wall mounted thermostat and 1-3 radiator thermostat, only the wall mounted thermostat can display the actual room temperature in pimatic.
Is it possible to create a dummy device per room, that can display the actual temperature, log the valve position of one radiator thermostat and display the temperature of the wall mounted thermostat and can adjust the room temperature?
That would be great for the hap-plugin (HomeKit).
Why I cannot adjust the temperature set point with the wall mounted thermostat?
That would be great to use that with the pimatic-hap HomeKit plugin.
At the moment I must add 2 devices per room, one to displays the temperature, but cannot adjust and the other one to set the temperature but cannot display the actual temperature.
Maybe this is helpful
http://forum.pimatic.org/topic/1026/solved-how-can-i-connect-2-pi-s-via-network/15
###################################################
hallo,
die nachricht kommt zwar spät, aber hilfreich für die wo den post finden.
habe 2 max Thermostate in meinem haus auf Stockwerk 1
Nartürlich müsst ihr das an eure config anpassen.
Habe ein Dummy erstellt
#################################################
Hello,
Although the object is late, but helpful for where post can find.
have 2 max thermostats in my house on floor 1
Nartürlich you have to adapt to the your config.
Have a dummy created
################################################
{
"comfyTemp": 22,
"ecoTemp": 18,
"id": "heizung-stock-1",
"name": "Heizung Stock 1",
"class": "DummyHeatingThermostat",
"guiShowValvePosition": false,
"guiShowPresetControl": true,
"guiShowModeControl": true
},
Dazu die passende Regeln
Regel 1. temperatur gleich setzen wie der dummy
Rule 1. temperature set equal to the dummy
{
"id": "heizung-stock-1",
"name": "Heizung stock 1 set temp",
"rule": "when $heizung-stock-1.temperatureSetpoint changes then set temp of Heizung Wohnzimmer to $heizung-stock-1.temperatureSetpoint and set temp of Heizung Büro to $heizung-stock-1.temperatureSetpoint",
"active": true,
"logging": false
},
Regel 2. den selben mod setzen
{
"id": "heizung-mod-stock-1",
"name": "Heizung mod stock 1 ",
"rule": "when $heizung-stock-1.mode changes then set mode of Heizung Wohnzimmer to \"$heizung-stock-1.mode\" and set mode of Heizung Büro to \"$heizung-stock-1.mode\"",
"active": true,
"logging": false
}
Hallo
Ich kann bei mir den Automodus nicht schalten weil er ausgegraut ist und somit nicht zur verfügung steht.
Wie kann ich das ändern?
“deviceId”: “184ec2”,
“comfyTemp”: 21,
“ecoTemp”: 17,
“id”: “wohnzimmer”,
“name”: “Wohnzimmer”,
“class”: “MaxculHeatingThermostat”,
“guiShowModeControl”: true,
“guiShowValvePosition”: true,
“guiShowBatteryState”: true,
“minimumTemperature”: 4.5,
“maximumTemperature”: 30.5,
“guiShowPresetControl”: true,
“guiShowTemperatureInput”: true,
“windowOpenTime”: 30,
“windowOpenTemperature”: 4.5,
“guiShowConfigButton”: false,
“groupId”: “01”,
“xAttributeOptions”: []
Gruß Hermann