Rule problem
Hey folks,
I have a problem with one of my rules.
If
lamp is turned on for 5 minutes and pir is absent for 5 minutes
then
turn off lamp
The 5 min delay is to prevent to lamp to go off, if I turn the lamp on when no movement is detected. But… If I turn it on and go inside the room(movement detected) the lamp goes off after 5 min 
Any ideas?
pimatic + MySensors + Homeduino + z-way
https://github.com/n3roGit/MySensors_n3ro
@n3ro i think this is because the second part is true because no movement was detected for 5 minutes. from that point you turn on the lamp the first part is true after 5 minutes, and then the lamp would be turned off.
try this:
if pir is present then set $pir to 1
if pir is absent for 5 minutes then set $pir to 0
if lamp is turned on for 5 minutes and $pir is 0
then turn off lamp
if lamp is off and $pir is 1 then turn on lamp
or maybe it works with just one rule:
if lamp is turned on for 5 minutes and pir is absent for 5 minutes and pir is not present
then turn lamp off
so this rule is not true anymore if movement is detected