Hi,
No I am not using the moveByPercentage feature. But with the plugin update which provides this new feature the rollingTime found its way to the homeduine shutterDevice config.
Once more my problem. When I press a rolling button on the UI the button stays in this mode always:
It will not be released automatically.
For this I create a rule for each shutterDevice to get the buttons released.
Example:
when position of jalousiemodul-wz is up then stop jalousiemodul-wz after 30000 ms
This kind of rule ensures that the button gets released and stops the shutter after 30 seconds in case of the UP button of jalousiemodul-wz was pressed.
My idea is to use the provided parameter rollingTime to send a stop command after the rollingTime ends (starting from the manual press action on the UI).
To clarify this, if a roller shutters is operated by a rule, e.g. to drive up in the morning or down in the evening, the corresponding button is released at the end of the specified time (see rule -> after 30000 ms). The rollingTime function or the moveByPercentage feature is not necessary for this. This works since years.
I hope now its more clear to you. Otherwise my english seems to be too bad to express my idea.