Everywhere ESP8266… You can take a look to ESPurna with Alexa support MQTT and much more…
I’d flashed many devices and one bulb…
How did you control RGB with it? There is no MQTT RGB Device… Only dimmer…
MagicHome RGB controller
Everywhere ESP8266… You can take a look to ESPurna with Alexa support MQTT and much more…
I’d flashed many devices and one bulb…
How did you control RGB with it? There is no MQTT RGB Device… Only dimmer…
Tasmota can be used as a RGB controller in the newest version. You need to input the gpio pins as my screenshot. Then in console you can set “SetOption15 1” This will make it into the RGB controller, so you can send a mqtt message with a color in hex as payload and control the brightness as a dimmer.
BTW it is not a esp8266.
It is a esp8285.
@simonbove said in MagicHome RGB controller:
mqtt message with a color in hex as payload and control the brightness as a dimmer.
Yes then you have three different dimmer… That is bad… there is no mqtt rgb or rgbw support for pimatic…
I miss a color picker…
I have 1 dimmer. And then made mqtt buttons with the colors I want. I don’t have a color picker, and I don’t need one, since I made a button with the colors I use.
Can you take a screenshot of your device from pimatic? I can’t imagination yet clearly…
Thanks for sharing!
Otherwise you can use three dimmers for r,g and b and then you can create also many different colours…
The MQTT topics I’m using for the dimmer is:
The magic happens with the SetOption15 1 command
Here is my setup with colorpicker.
I made a DummyLedLight device.
This will create a few varriables.
Then a few rules:
When $tasmota-rgb.color changes Then publish mqtt message "$tasmota-rgb.color" on topic "tasmota/rgb/cmnd/Color" on broker MQTTBroker
When $tasmota-rgb.power changes Then publish mqtt message "$tasmota-rgb.power" on topic "tasmota/rgb/cmnd/POWER" on broker MQTTBroker
When $tasmota-rgb.brightness gets updated Then publish mqtt message "$tasmota-rgb.brightness " on topic "tasmota/rgb/cmnd/dimmer" on broker MQTTBroker
This works for RGB but not for RGBW(W).
If I want just white I hit a MQTT button that sends #000000FF
Follow my domotica project on http://maredana.nl
@incmve Can you tell me how ro make a DummyLedLight device?
Thanks Hans
Devices > Add a new device > DummyLedLight
@hansjeu said in MagicHome RGB controller:
@incmve Can you tell me how ro make a DummyLedLight device?
The “DummyLedLight” is part if the led-light plugin.
Thank you.