@Nikolov The device model SilverCrest Z31370A mentioned by @leader21 is included in the list of supported deviced at - https://forum.pimatic.org/topic/35/supported-devices-plug-and-play. The device information refers to the same link as the one contained in your first post.Can you please check the model number of you device?
-
Probleme bei RF türklingel
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
Hm, vielleicht sind es doch nicht 433MHz? Reicht ja schon, wenn der Frequenzbereich etwas verschoben ist (obwohl das nicht zulässig wäre).
-
ok it’s really exactly the same as shown in the plug and play devices list.
but maybe the frequency is the problem, my rtl-sdr locate the transmitter more at 434mhz than 433mhz… dont know if that could be a problem?
-
@Nikolov said in Probleme bei RF türklingel:
more at 434mhz than 433mhz
Your rtl-sdr is working well. Actually, the ISM center frequency used for device RF is 433,92 Mhz. When 433MHz is mentioned, they actually mean 433.92 MHz, some also call it 434 MHz.
Can you please check the model number of your door bell device?
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
the model number of the Device is Z31370A
-
@Nikolov said in Probleme bei RF türklingel:
the model number of the Device is Z31370A
Ok, thanks. Sorry, I overlook that you already said it is the same version.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
@Nikolov rtl-sdr is a rf receiver if im correct?
Then it is strange that one receiver can see it and the other one not. Did you try pressing the bell real close to the receiver?
Please try this the following;
Go into the raspberry pi, execute;
sudo service pimatic stop
Or, if you didnt install as a service do this to stop pimatic;
sudo pimatic.js stop
Now execute;
sudo pimatic.js
Now you will see pimatic starting, when it is all done, press the doorbell and copy the output to this thread.
-
@Gleno0h yeah rtl-sdr is a rf-receiver, but i run the sdr on my notebook, not on the raspi!
that would be great if i can post you the ouput but theres no one
i’ve done it like you wrote but i can hit the doorbell as often as i want… no output… nothing,
if i hit a button of a rf-remote it shows correctly different protocols… so the receiver of my homeduino works i think… -
@Nikolov well, if the sticker of the device tells you it is 433mhz, if another receiver can pick it up, and if there is no debug data, then i am lost. One last question, what version of homeduino and pimatic do you have. Full versions please.
If there is a update for one of them, update it.
-
pimatic is 0.9.42
homeduino is 0.9.11what makes me super stupid is the fact that some user of pimatic list the doorbell in the plugandplay list?!?!
-
@Nikolov said in Probleme bei RF türklingel:
what makes me super stupid is the fact that some user of pimatic list the doorbell in the plugandplay list?!?!
Yes, that’s why I asked about the model. Maybe it is a newer make. Does the model number also tells “Version 12/2015”? If it is not stated on the model plate check the State of Compliance as part of the user manual.
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
oooo shit, now i see the difference, the model which i own is from 12/2013 sorry guys
-
@mwittig could you maybe go into details about why homeduino doesnt see any rf?
Shouldnt it atleast display raw data or something?
-
what’s worth a try to change the homeduino firmware with the one described here.
https://forum.pimatic.org/topic/3065/homeduino-doesn-t-detect-first-single-transfer/@theothermarcus @mwittig do you have any more information about this?
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
i changed the homeduino firmware to the one @leader21 told, same problem, cant see anything in the debug screen.
not even any raw data… really strange.