With power plug removed? Normally full reset power plug remove. Not via Web interface.
-
Fritzbox WLAN Script SomeOneAtHome
-
Yes, i habe removed Power Plug.
-
Strange! I have no idea why this happens.
-
Yes, i have this Problem only with the FritzBox 7490.
FritzBox 7360 and FritzBox 7330 works fine.I think i reset the FritzBox and import my config after the Reset.
-
Before this try to delete this device over Web access from your box if it’s only one and reconnect with new IP.
-
I have delete the device from my box but nothing changed.!
I have make some Screeshots.
The Output from The Script:
Fritz Box Info of the Device
-
The Output come only from the FritzBox 7490.
I have execute the Script with every IP alone. And only the FritzBox 7490 show this situation. -
I think i gotcha… This is not a fault of your box. I think your phone will be connected to another fritzbox?
I request all box and if any box is true then output will be true. For me sounds that your phone is connected to another box. You can check this if you use only ip of 7490.
Another thing, where are this 1 0 is coming? Are you type this line into console? Than this will be wrong. Its not needed. Maybe this was a fault to…
-
WLAN on the Phone is deactivated. And the Output 1 come only by the Fritz Box 7490. I have try the Script by use one IP. The Error ist only by the 7490.
Is 1 0 not needed? I have copy the Line from a Post from this Forum. I will remove the 1 0 from my Line. But the Script works fine every time.
-
No sir, 1 0 is not needed. It will be ignore by my script.
Did you read out via console command or via pimatic to confirm 30 minutes network stay?
How many times are you check devices with pimatic. Did you check other devices in the meanwhile? -
I read out via console command and Pimatic. Is would check only one device. The interval is 12000ms.
The network stay is differently. Some times 5 minutes up to 3 hours.
-
12000ms??? That is toooo short… Set to 60000 each minute is really enough. Otherwise you will float your box with to much request.
-
Ok, i will changs this too.
But i think that is not the Problem. -
Using this since today. Great stuff works for me…
Would be nice to have this out of the box from pimatic a mobilePresenceSensorFritz or something like this.
-
I’m not familiar with coffee script and I don’t have time to learn another script language. So if there is a developer, it would be nice to create a plugin for that thing.
But I’m lucky that my script works for other people and would proud to share it.
-
Dear pimatics
Would anybody be so kind to provide a step by step guide on how to implement this script ?
Thanx
-
Start to ask with your issue and we try to help…
-
Well… my issue is that I would like to track the presence of my iphone at home but due to the “deep sleep” the pimatic-ping plugin does not work.
my question is: how to I implement this solution into my pimatic
I am more of a “user” used to GUI and I would need step by step guidance to implement this script. Is it part of a plugin, or do I need to run it in the terminal, what are the commands…??
-
@cherberg hi you copy the scipt an make a php file with the code
in pimatic add a shellpresencesensor
http://img292.imagevenue.com/img.php?image=131408686_Unbenannt222_122_105lo.JPG -
thanx for your help. As said I am a “gui user” so I am already struggling to perform this very first taks and would need exact steps to “copy the scipt and make a php file with the code”
I am looking for something like the step by step install guide for pimatic with detailed instructions which commands to use “click here” “copy and paste this” “execute sudo xxxxxx”…
Thanx for your patience