Homeduino and ultrasonic error after wiringpi update to 2.44

---

Hi,

today i have update my pi too the newest version.

Wiringpi has update too :

gpio -v
gpio version: 2.44
Copyright © 2012-2017 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty

Raspberry Pi Details:
Type: Pi 2, Revision: 01, Memory: 1024MB, Maker: Sony

• Device tree is enabled.
  *–> Raspberry Pi 2 Model B Rev 1.1
• This Raspberry Pi supports user-level GPIO access.

Now i get an error on homeduino plugin and ultrasonic plugin.

Homeduino error :

[pimatic-homeduino] data: “hardware not supported”

I use the gpio driver.

Ultrasonic error :

Error init HC-SR04 ultrasonic sensor

What can I do about it ? Must i downgrade to a older wiringpi kernel ?

Please help me !

Hello ,

i have solved my problem with the ultrasonic-plugin . I use now a shell sensor with a python skript. It runs very well.

My problem with the Homeduino-plugin is still existing.

@Arlive said in Homeduino and ultrasonic error after wiringpi update to 2.44:

Hello ,

i have solved my problem with the ultrasonic-plugin . I use now a shell sensor with a python skript. It runs very well.

My problem with the Homeduino-plugin is still existing.

Idk if it matters but downgrade wiringPi to the version that worked?

Yes , but i dont know how i do this. ^^

@Arlive said in Homeduino and ultrasonic error after wiringpi update to 2.44:

Yes , but i dont know how i do this. ^^

Go into the wiringpi dir and run
sudo ./build uninstall

Then grab an older version here:
https://git.drogon.net/?p=wiringPi;a=shortlog

Goes back to 2012 so.