thanks for sharing!
-
Pioneer AVR Control plugin
-
I’m able to get the display working with your config.
Though i’m unable to send command’s to it.
Within the logs i’m seeing:**No plugin found for device "avr-presence" of class "PingPresence"!**
Do i need any additional plugins ?
-
Hi,
you also need the ping plugin to detect whether your avr is available in the network or not. -
@SaxnPaule said in Pioneer AVR Control plugin:
Hi,
you also need the ping plugin to detect whether your avr is available in the network or not.ping installed, though i think my pimatic is toasted.
2017-02-04 10:23:47error [pimatic]: A uncaught exception occured: Error: Resource temporarily unavailable at Error (native) at Socket.onRecvReady (/home/pi/pimatic-app/node_modules/pimatic-ping/node_modules/net-ping/node_modules/raw- socket/index.js:86:13) at emitNone (events.js:67:13) at SocketWrap.emit (events.js:166:7) This is most probably a bug in pimatic or in a module, please report it!
Think I need a new sd card and reinstall the whole thing.
So don’t think it’s something to do with your plugin, -
@passie The error tells you that the ping plugin is not working. That doesn´t mean that your SD is toasted. Or do you have other messages like this?
Did you restart Pimatic after installing Ping?
But having a “replacement SD” is always a good Idea for a Raspberry Pi -
well had some other issue’s as well. Not sure what happend with the pi and pimatic
-
try to remove the ping plugin from the node_modules folder and start pimatic again.
maybe this will solve the issue, since pimatic will install the ping plugin again.what you need to do :
sudo service pimatic stop
sudo rm -rf /home/pi/pimatic-app/node_modules/pimatic-ping
sudo service pimatic start
pimatic v0.9 has been released!
Support Pimatic and get some free stickers
Like us on Facebookmake it so !
-
Today I got my new VSX-831. What should I say. It’s no real Pioneer any longer. It’s more an Onkyo than a Pioneer.
Unfortunately my plugin also doesn’t work with the 2016 models and newer.So I need to write a new plugin “pimatic-onkyneer-remote”
I don’t know when I’ll find the time
-
@SaxnPaule Yes, you have an Onkyo receiver with Pioneer label. The telnet service (port 23 by default) should be available on port 60128. The command layout slightly differes, but you should be able to adapt to it easily. See also https://forum.pimatic.org/topic/428/dhow-to-control-onkyo-receiver
"It always takes longer than you expect, even when you take into account Hofstadter's Law.", Hofstadter's Law
-
The used eiscp library supports only “real” ONKYO receivers. The commands.yml doesn’t include the Pioneer models. So the AVR isn’t detected in the network.
BUT: I found a working library. https://www.npmjs.com/package/onkyo.js
-
version 0.5.3 released 2017-03-19
- Added retryCount increment and reset last retry after successful connect