Ok i’ll give it another try…
-
New Plugin - ChronoTherm (ex CronoAccesoSpento)
-
So it’s working…
I’ll post the new rules later…so here we go:
for the boost mode:
when $ChronoThermDevice.result changes and $ChronoTherm.result is 50 then set mode of MaxHeatingThermostat to "boost" and after 300 seconds set mode of ChronoThermDevice to "auto"
and for the normal temp - just because setting MaxHeatingThermostat to 50 °C set them to 18°C and not to boost…
$ChronoThermDevice.result changes and $ChronoThermDevice.result is not 50 then set temp of Hzg-Bad to $ChronoThermDevice.result
-
publish 0.9.6-2 to npm
-
@Zacca I´m a little bit confused.
Wich is the newer Version? Pimatic says i have 0.9.7.
Should i delete and load from NPM?I saw today that the Time Hand ( segnale orario/bandella) is not synchron with the Bars.
(Sorry, i changed the colors,i don´t like green ) -
@Michael-Rudek sorry but I publish the 0.9.6.2(the old version + boost mode) to npm and the same version to github. For some time i upload the 0.9.7 to github but it s full of bugs.
Now i m rewriting a new 0.9.7 in a different mode, with all that news that you have see. But it s a Little bit complicate work with time and date -
New version 0.9.7 on github and npm
@Michael-Rudek now work /api/device/cucina/changeMinToAutoModeTo?mintoautomode=1
to add minute to return to automode from api -
@Zacca new 0.9.7-2 version
add button to hide and show graph bar -
Only a quick Check, cause i don´t have the Time for an exessive Test.
Vers.0.9.73/api/device/YOURDEVICE/changeMinToAutoModeTo?mintoautomode=1
works, but i´m not shure how to use it.
Do i first set the Mode and then the Time? Or does the Time persist?Where is the Button for show/hide Graph?
Do i have to add a xAttribute? With wich name?The Time-Hand is not moving anymore. If you refresh the Page it shows the actual time, but doesn´t move.
The red Time-Hand is now shown on other Devices.
But if you delete it on one Device and make a new Time, on the other Device the old one is shown.
Example:
Make an Off-Timer 1h on your Computer.
Watch on your Mobile–Its correct
Make an Off-Timer 2h on your Computer.
Watch on your Mobile–Not correct, still showing 1h -
@Michael-Rudek said in New Plugin - ChronoTherm (ex CronoAccesoSpento):
Only a quick Check, cause i don´t have the Time for an exessive Test.
Vers.0.9.73/api/device/YOURDEVICE/changeMinToAutoModeTo?mintoautomode=1
works, but i´m not shure how to use it.
Do i first set the Mode and then the Time? Or does the Time persist?Try, first set mode than time
Where is the Button for show/hide Graph?
It s on the 0.9.73, check if you have this version
Do i have to add a xAttribute? With wich name?
I don’t know what is xAttribute
The Time-Hand is not moving anymore. If you refresh the Page it shows the actual time, but doesn´t move.
The “Real time” change after a manual refresh every “interval”(the value in the config.json)
The red Time-Hand is now shown on other Devices.
But if you delete it on one Device and make a new Time, on the other Device the old one is shown.
Example:
Make an Off-Timer 1h on your Computer.
Watch on your Mobile–Its correct
Make an Off-Timer 2h on your Computer.
Watch on your Mobile–Not correct, still showing 1hUhmmmm i open chrome, set timeout
open firefox, work fine
reset timeout on chrome
than reopen firefox and work fine again
Try to force a refresh -
@Zacca said in New Plugin - ChronoTherm (ex CronoAccesoSpento):
Where is the Button for show/hide Graph?
It s on the 0.9.73, check if you have this version
After deleting the Cache it works, Nice
The Time-Hand is not moving anymore. If you refresh the Page it shows the actual time, but doesn´t move.
The “Real time” change after a manual refresh every “interval”(the value in the config.json)
No it doesn´t here. I have 60 seconds in the config and i´m watching for more than a hour now. Browser Firefox (I´m at work, not home)
The red Time-Hand is now shown on other Devices.
But if you delete it on one Device and make a new Time, on the other Device the old one is shown.
Example:
Make an Off-Timer 1h on your Computer.
Watch on your Mobile–Its correct
Make an Off-Timer 2h on your Computer.
Watch on your Mobile–Not correct, still showing 1hUhmmmm i open chrome, set timeout
open firefox, work fine
reset timeout on chrome
than reopen firefox and work fine again
Try to force a refreshWeird, now my Mobile shows 01/01/1970 01:00
After a refresh it shows the right time.
Maybe the Interval is not working? -
@Michael-Rudek said in New Plugin - ChronoTherm (ex CronoAccesoSpento):
@Zacca said in New Plugin - ChronoTherm (ex CronoAccesoSpento):
Where is the Button for show/hide Graph?
It s on the 0.9.73, check if you have this version
After deleting the Cache it works, Nice
The Time-Hand is not moving anymore. If you refresh the Page it shows the actual time, but doesn´t move.
The “Real time” change after a manual refresh every “interval”(the value in the config.json)
No it doesn´t here. I have 60 seconds in the config and i´m watching for more than a hour now. Browser Firefox (I´m at work, not home)
Yes, I have see.
The red Time-Hand is now shown on other Devices.
But if you delete it on one Device and make a new Time, on the other Device the old one is shown.
Example:
Make an Off-Timer 1h on your Computer.
Watch on your Mobile–Its correct
Make an Off-Timer 2h on your Computer.
Watch on your Mobile–Not correct, still showing 1hUhmmmm i open chrome, set timeout
open firefox, work fine
reset timeout on chrome
than reopen firefox and work fine again
Try to force a refreshWeird, now my Mobile shows 01/01/1970 01:00
After a refresh it shows the right time.
Maybe the Interval is not working?No, the problem is the interval. In the interface doesn t work. I have to take another way.
I think I have find a solution but now i don t have time to correct part of the code -
@Zacca Its Christmas, spend Time with your Family, not with your Computer
-
@Michael-Rudek Yes. …-15 days with my baby and my wife with only a tablet.
Merry Christmas to you and to all -
hello,
yes the part for the actually status(time) is also hanging by me.
–> every first time i open pimatic, it has the state of the load before (because of the cache) and after a reload it shows the current stateand i really like the part to expand the GUI
Mit freundlichen Grüßen
Chrisedit:
made an issue on github.
TimeStamp refreshes just after second reload #4 -
Nice would be also to include the realtemp in the graph-page…
mfg
Chrisedit:
same here:
Implement realtemp in graph-Page #5 -
Tried to install you plugin, but I only get a big red “Off circle” instead of the real temperature. I linked realtemperature to my MAX! $WorkroomHeatingThermostat.measuredTemperature.
-
@hanss i think you have write interface:1 in the config.json. You have to write interface: 0 or delete the line interface.
If not, could you please post me the part about Chronotherm in config.json?
-
@Zacca Yes, that was the point. Now the interface looks like it should.
-
Is it possible to have variable times e.g. sunrise or values from other variables?
-
@Heizelmann could you explain better please what you have to do?