Dear pimatic community,
since almost 2 weeks I am in love with pimatic and it’s capabilities. I have already connected several power switches (Elro and AVM Fritz), several MAX! heating valves and one Nobily shutter. For the 433Mhz handling I use an Arduino Nano. All of those components behave like they should and it is a joy to play around with different automation scenarios.
Unfortunately the protocol for two Nobily shutters cannot be identified (both Model PRE4, http://www.nobily.de/rolladenmotor/funk-elektronisch/40mm-achtkantwelle/170/nobily-rolladenmotor-pre4).
Here are the debug logs:
Shutter Kitchen:
DOWN:
debug [pimatic-homeduino]: received: [ 292, 408, 672, 1568, 4720, 7776 ] 43222202220221022202020202022221022102210202022102022102020202022202022221020222224322220222022202210202020202222102210221020202220202210202020202220202212202022125
debug [pimatic-homeduino]: data: "RF receive 4720 1568 672 292 408 7776 0 0 01222232223224322232323232322224322432243232322432322432323232322232322224323222220122223222322232243232323232222432243224323232223232243232323232223232242232322425"
UP:
debug [pimatic-homeduino]: received: [ 312, 680, 1568, 4720, 7772 ] 32101001100110011101010101011011011101100101011001011001010101011101010111010101113211110111011001110101010101111101100111010101110101110101010101110101011001010114
debug [pimatic-homeduino]: data: “RF receive 4720 1568 680 312 7772 0 0 0 01232332233223322232323232322322322232233232322332322332323232322232323222323232220122223222322332223232323232222232233222323232223232223232323232223232322332323224”
Shutter Child’s room:
DOWN:
debug [pimatic-homeduino]: received: [ 344, 716, 1564, 4720, 7772 ] 32101001011010010101010101011010010110100101101010101001010101011001011010010110113210100101101001010101010101101001011010010110101010100101010101100101101001011014
debug [pimatic-homeduino]: data: "RF receive 4720 1564 716 344 7772 0 0 0 01232332322323323232323232322323323223233232232323232332323232322332322323323223220123233232232332323232323232232332322323323223232323233232323232233232232332322324"
UP:
debug [pimatic-homeduino]: received: [ 332, 704, 1564, 4724, 7772 ] 32101001011010010101010101011010010110100101101011101001010101011101010110010101113210110101101101010101010101101001011010010110101110100101010101110101011001010114
debug [pimatic-homeduino]: data: “RF receive 4724 1564 704 332 7772 0 0 0 01232332322323323232323232322323323223233232232322232332323232322232323223323232220123223232232232323232323232232332322323323223232223233232323232223232322332323224”
I know that Willy is generally the man to solve this, but anybody else who could help is welcome to dig out the ID of the shutters!
Thank you,
ArrowX (aka Thomas)
Working Shutter Info:
The shutter which works perfectly is another Nobily model which comes with a different receiver and a different remote controller;
Receiver: http://www.nobily.de/rolladen-steuerungen/funkgebunden/95/nobily-funk-pr/pre-externer-mini-empf.?c=12
Remote Controller: http://www.nobily.de/rolladen-steuerungen/funkgebunden/176/pr/pre-1-kanal-handsender-mit-timer?c=41
Interestingly, the shutter is identified as “Shutter3” and “Awning2” and not as “Shutter1” which is documented to be Nobily compatible.